We – EPG Team the greatest agricultural gearbox and pto manufacturing unit in China with 5 distinct branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
If you are searching for a 540 PTO shaft, 540 to a thousand PTO adapter, 540 PTO hydraulic pump, or a 540 PTO gearbox, search no further. It’s critical to substitute PTO components that are worn or cracking before you have a key breakdown that could be high-priced and even unsafe. We have PTO travel shafts as nicely as crucial defend parts for your protection. Our Eurocardan elements incorporate a range of types of clutches to increase the operation of your electricity consider-off method. PTO shafts and components are an important component of the more than 26,000 products we have for farm, store, property and yard. Near up of two yokes with the common joint. Note the slight oozing of grease from the UJ seal finishes, the clump of grease is from within the yoke splined shaft spot –Generate (outer) yoke has a woman (normal spline) hole and “Y” form stop that is the common joint (UJ) mount. –UJ is a cross formed casting obtaining roller bearings enclosed with caps at all four points and is held into the yoke with 4 “C” clips –Internal yoke and generate shaft is another yoke welded to the generate finish, of the generate shaft. –Pushed shaft and interior yoke is the pushed shaft that rides inside of the travel shaft and has a yoke welded at the driven end –UJ an additional UJ as above1 pto shaft “EPG” ram 2500 driveshaft model lucas push shaft rotocultivator teraflex driveshaft ploughshares collection 1 pto shaft in pto shaft plastic guard for sale T.S. mr driveshaft lasalle total pto push shaft assembly lines a thousand to 540 adapter created pto shafts for sale in our manufacturing unit have been tested and appraised by the Ministry of Agriculture and have obtained the license of popularizing farm equipment promulgated by the Ministry of Agriculture of the People’s Republic of China.
3WPZ-1200G kind self propelled spray boom sprayer
3WPZ-1200G collection of sprayer is suitable for spraying the medicament for the planter of bean, corn, cotton, grain.
Also for garden,fruiter,vegetable, highway aspect tree. The ability could be 1200L, the spraying width could be 16m with 53hp.
Benefits:
•This type of increase sprayer is a tractor mounted sprayer.
•Wide working scope,spraying for bean,cotton,corn and so forth.
•Wide spraying with to be 16m max.and the operating angle of this tractor sprayer could be adjusted.
•The capability of mounted growth sprayer could be modified to satisfy diverse need to have from the consumer.
Model | 3WPZ-1200G self-propelled spray growth sprayer | Pump Kind | Plunger pump |
Engine Model | 4L68 (Changchai) turbocharged diesel motor | Pump Design | OS-5200 |
Power / Pace | 53 hp 2400r / min | Pump Pressure | 0-45kgf/cm² |
Displacement Level | China III | Pump Flow | 220-240L / Min |
Gear | Forward gear 4,reverse gear one | Pump Velocity | 600-800r / min |
Drive Manner | Four-wheel travel | Tank Ability | 1500L |
Steering Mode | Hydraulic steering | Spray Top | 0.five-three. m |
Mixing Method | Circulating water mixing | Nozzle Model | No.three |
Folding Method | Hydraulic folding | Spray Angle | 110° |
Spray Width | 16 m | Nozzle Flow | 1.2L / min |
Ground clearance | 1.eight m(customizable) | System Operate Pressure | 0.3-.5Mpa |
Wheel Monitor | 1.95-2.6 m(adjustable) | 3 Filtration System | Tank inlet, pump inlet, nozzle |
Operating Performance | 21-thirty acres / hour | Battery | 12v / 120AH |
Walking Pace | ≤25Km / h | Front Tire Model | Tractor tires nine.5-24 |
Overall Dimension | 5800 mm x 2900 mm x 3700 mm | Rear Tire Design | Tractor tires 9.5-24 |
Weight | 3811Kg | Water Tank | 15L |
Q:Are you a manufacturing unit or trading business?
A:We are a factory.
Q: How does your manufacturing unit do with regards to quality handle?
A: Quality is precedence. we always say fantastic importance to quality controlling from the very commencing to the extremely conclude.
Q: Do you have a item accent?
A: Yes, we have the equipment of the solution.
Q:Can you customise the product?
A:We can personalize the merchandise.
Q: What’s your payment terms?
A: Payment terms is T/T or L/C,We accept all reasonable payment.
Q: How about delivery time of your machine?
A: The delivery time is in 60 working days. It depending your quantity.
The use of authentic gear manufacturer’s (OEM) component figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the listed substitute components contained herein are not sponsored, accepted, or produced by the OEM.