Product Description
| Type | 1GQN-100 | 1GQN-120 | 1GQN-125 | 1GQN-140 | 1GQN-150 | 1GQN-160 | 1GQN-180 | 1GQN-200 | 1GQN-220 | 1GQN-250 | 1GQN-300 | ||
| FOB(HangZhou) | |||||||||||||
| Working width(mm) | 1000 | 1200 | 1250 | 1400 | 1500 | 1600 | 1800 | 2000 | 2200 | 2500 | 3000 | ||
| Working depth(mm) | dry land | 80-140 | 120-180 | 160-180 | |||||||||
| water land | 100-160 | 140-200 | 160-200 | ||||||||||
| No. of blade (pc) | 22 | 26 | 26 | 30 | 34 | 38 | 50 | 54 | 58 | 62 | 66 | ||
| Weight(kg) | 200 | 215 | 220 | 230 | 240 | 250 | 415 | 420 | 460 | 480 | 540 | ||
| Linkage | Three point mounted | ||||||||||||
| Matched power(hp) | 12–20 | 15-18 | 18-20 | 20-25 | 25-30 | 30-40 | 50-55 | 55-75 | 60-80 | 75-100 | 80-120 | ||
Rotary tiller adopts a side gear transmission structure and is a tillage machine tractors. The machine adopts wide tillage width
and symmetrical suspension to cover all wheel tracks. The machine has reliable quality and excellent performance, and
can be suitable for dry land and paddy field operations. It has the characteristics of grabbing time for farming, saving labor,
and low cost.
1. At the beginning of the operation, the rotary cultivator should be in the lifting state, firstly combine the power output shaft to increase the speed of the cutter shaft to the rated speed, and then lower the rotary cultivator to make the blades gradually into the soil to the required depth. It is strictly forbidden to combine the power output shaft or descend the rotary cultivator sharply after the blade enters the soil to avoid bending or breaking the blade and increasing the load on the tractor.
2. During the operation, the speed should be as low as possible, so that the quality of the operation can be ensured, the soil can be finely broken, and the wear of the mechanical parts can be reduced. Pay attention to whether there are noises or metal percussions from the rotary tiller, and observe the condition of broken soil and tillage depth. If there is any abnormality, the machine should be shut down immediately for inspection, and the operation can be continued after troubleshooting.
3. When turning on the ground, work is prohibited. The rotary tiller should be raised to keep the blades off the ground and the tractor throttle should be reduced to avoid damage to the blades. When lifting the rotary tiller, the inclination angle of the universal joint should be less than 30 degrees. If it is too large, impact noise will be generated, which will cause premature wear or damage.
4. When reversing, crossing ridges and transferring plots, the rotary tiller should be raised to the highest position and the power should be cut off to avoid damage to the parts. If it is transferred to a distant place, the rotary tiller must be fixed with a locking device.
5. After each shift, the rotary tiller should be maintained. Remove the dirt and weeds on the blade, check the tightness of each connecting piece, add lubricating oil to each lubricating oil point, and add butter to the universal joint to prevent aggravation of wear.
| Type: | Rake |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying |
| Material: | Iron |
| Power Source: | Tracror |
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
| Samples: |
US$ 600/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
The Different Parts of a PTO Shaft
Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.
Tractor’s power take-off (PTO) shaft
A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.
Types
PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.
Rotation direction
The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.
Safety chain
One of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.
Shield
A PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
editor by CX 2023-07-11
China manufacturer 3490 Splined yoke, PTO Drive Shaft (Triangular tube, Lemon tube) Cross journal Full Series Parts for farm tractor parts double yoke pto shaft
Condition: New
Warranty: 1 Year
Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company
Weight (KG): 1.4 KG
Showroom Location: None
Video outgoing-inspection: Provided
Machinery Test Report: Provided
Marketing Type: Ordinary Product
Type: Spline Yoke
Use: Tractor and Tractor Implements
Product Name: 34*90 Splined yoke, PTO Drive Shaft
Material: Forging 1045C
Color: Yellow
Process: Forging
Certificate: CE ISO TS
Teeth: 1 3/8” Z6
Usage: PTO Shaft
Cross Kit: 34*90
Yoke Type: 01 Push Pin Yoke
MOQ: 1
Packaging Details: Plastic bag+ Woodencase + According to Customer’s request
Port: ZheJiang or HangZhou
| Model Number | 34.0501B Splined Yoke |
| Function | Drive Shaft Parts & Power Transmission |
| Use | Kinds of Tractors & Farm Implements |
| Brand Name | 9K |
| Yoke Type | Double push pin,Bolt pins, Resin Packing asynchronous motor 220V electric air conditioner fan motor 18W Split pins,Push pin,Quick release,Ball attachment,Collar….. |
| Processing Of Yoke | Forging |
| Plastic Cover | YW;BW;YS;BS;Etc |
| Color | Green;Orange;Yellow;Black Ect. |
| Series | T1-T10; L1-L6;S6-S10;10HP-150HP with SA,RA,SB,SFF,WA,CV Etc |
| Tube Type | Lemon,Trianglar, Driver DM556 DM542 Digital Stepper Motor Driver 2 Dhase 4.2A for42 57 Stepper Motor NEMA172334 Controller Can Replace TB6600 Star,Square,Hexangular,Spline,Special Ect |
| Processing Of Tube | Cold drawn |
| Spline Type | 1 1/8″ Z6;1 3/8″ Z6; 1 3/8″ Z21 ;1 3/4″ Z20; 1 3/4″ Z6; 8-38*32*6 8-42*36*7; 8-48*42*8; |
| Place of Origin | HangZhou, China (Mainland) |
car drive shaft
editor by Cx 2023-07-11
China best Hay Straw Round Balers with Pto Shaft Tractor Mounted Agriculture Farm pto shaft for bush hog
Product Description
Hay straw balers with PTO shaft tractor mounted agriculture farm
Product Description
HangZhou Guoan Engineering Machinery Co.,Ltd is a comprehensive technology company integrating scientific research, production, sales and services. We have 20 years’ experiences of mechanical development and production. The 9YKD-60/870/890/1090 series round baler can be matched with 25-50hp tractor to go for the walking works in the field and is mainly used for collecting and bundling the dry green grass, straw, wheat-straw and cornstalk after their harvest.
Detailed Photos
We have many kind of series mini round baler:
4 normal mini baler:850 mini baler, 870 mini baler,1070 mini baler and 1090 mini baler.
4 Net wrap baler:850 net baler, 870 net baler,1070 net baler, 1090 net baler
4 F round baler:850F round baler, 870F round baler,1070F round baler,1090F round baler
| Model | 850 | 870/870F | 1070/1070F | 1090/1090F |
| Pickup Width | 700mm | 800mm | 950mm | 950mm |
| Dimension (L*W*H) |
115*130*120cm | 131*146*138cm | 131*167*156cm | 157*167*170cm |
| Baler Size (dia*width) |
50*70cm | 60*70cm | 62*95cm | 80*95cm |
| Efficiency | 2-5km/h | 2-5km/h | 3-8km/h | 3-8km/h |
| Productivity | 80bales/h | 80bales/h | 80bales/h | 80bales/h |
| Density | ≥115kg/m3 | ≥115kg/m3 | ≥115kg/m3 | ≥115kg/m3 |
| PTO Speed | 540r/s | 540r/s | 540r/s | 540r/s |
| Match Power | 25-50hp | 25-50hp | 25-50hp | 25-50hp |
| Weight | 400kg | 450kg | 550kg | 800kg |
| Force Feeding | / | 870F have | 1070F have | 1090F have |
Our Advantages
The function of straw baler is mainly composed including picking system, grass cabin, sprocket transmission mechanism, rope box, lead rope and early warning device, hydraulic control mechanism and so on. Automatic bundle rope, automatic picking straw crops, automatic bundling, automatic cutting rope, through the adjustment of the size of the sheave, to change the density when the rope bundled, so that the straw not scattered, not messy. The bale easy to transport and storage.
1.make the picking and bundling up at 1 time
2.easy to transport and storage after strapping
3.small volume, light weight, compact structure, easy to operate
4.The machine can be followed in combine harvester to achieve the best effect, save time and effort
Packaging & Shipping
| Package method | Iron crate with plastic film |
| package size (one unit) | 116*115*115(850), 115*130*120(870), 130*138*120(1070), 130*138*140(1090) |
| nearest port | HangZhou, China (100km away from our factory) |
| MOQ | 1 unit |
| shipping method | sea transport |
| accept trading term | FOB, CFR, DDU |
Certifications
Company Profile
HangZhou Guoan Construction Machinery Co., Ltd. was established in 1998. It is a comprehensive scientific and technological enterprise integrating scientific research, production and sales. The company mainly produces round bale balers, square bale balers, drum mowers, blade mowers, reciprocating mowers, disc mowers, silage machines, wrapping machines And other new energy sanitation cleaning equipment and various agricultural machinery spare parts. The company has more than 50 million fixed assets and 153 employees. The company is located in Xihu (West Lake) Dis.an Middle Road, HangZhou Economic Development Zone, the international kite capital, with superior environment and convenient transportation.
Sales Service
Pre-sales service:
1.We provide presales service in various forms, making investment budge, manufacturing, plHangZhou, so that customers can make a reasonable plan with less cost.
2.We will fist check customer’s goods and goods size, then we will recommend suitable wrapping machine to 100% suitable.
3.We will recommend and offer machine according to customer’s use and purchase budget.
In-sale service:
1.We will supply each manufacturing step photo for customer checking on time.
2.We will prepare packing and shipment according to customer’s needing in advance.
3.Testing the machine and making video for customer’s checking.
After-sale service:
1.We will guarantee the machine quality for 1 years.
2.We provide free training and answer customer’s question on technology in time.
FAQ
1. How to order?
-After you decide to purchase, we will send you proforma invoice with our bank information, bring this PI to the bank, and ask to make T/T for the deposit. For single set, your machine can be ready within 7 days after we getting the deposit, we will send to the port and deliver to you by sea.
-In case for more handing charges, you can transfer 100% of the payment, we can arrange the products and shipping under your allowance.
2. What size of tractor suitable for this baler?
-If your tractor will lift 400kg, it will operate our compact round balers.
-If your tractor has 15 to 150 PTO HP, then it will operate our compact hay balers.
-If your tractor has independent or live PTO you can operate our compact hay balers.
3. About the bales?
-Bale dimension: 850: 50 x 70cm; 870: 60 x 70cm.
-Bale weight: 850: 15-25kg; 0571 : 20-30kg. Weight is adjustable because density is adjustalbe.
-Efficiency: 80-120 bales per hour, this should be according to the density of the bales.
-Density of the bales can be adjusted, we suggest to container no more than 20% moisture.
-To store the silage bales, we recommend a hay wrapper:5080 model and 7571 model.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| After-sales Service: | Yes |
|---|---|
| Type: | Straw Baler |
| Automatic Grade: | Automatic |
| Customization: |
Available
| Customized Request |
|---|
Power Take-Off (PTO) Shafts
Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.
Power take-off (PTO) shaft
The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.
Types
There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.
Connections
A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.
Safety
It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.
Maintenance
One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
editor by CX 2023-07-07
China wholesaler China wholesale custom agriculture pto shaft massey ferguson tractor parts pto shaft cover
Condition: New
Warranty: 1.5 years
Applicable Industries: Hotels, Garment Shops, Machinery Repair Shops, Food & Beverage Factory, Farms, Food Shop, Construction works , Energy & Mining, Food & Beverage Shops
Weight (KG): 25 KG
Showroom Location: None
Video outgoing-inspection: Provided
Machinery Test Report: Provided
Marketing Type: New Product 2571
Type: Shafts
Use: Tractor,Rotary Cultivator,Planter Machine ,Farm
CE: certifacation
Warranty period: 3 year
Applications: For Tractor,Rotary Cultivator,Planter Machine ,Farm and etc
yokes: forging
advantage: Plastic cover can work normally between -35 °C to 80 °C
: li.kechina
Quality Control: 1
Detailed Images Other Products Our Company Goals of Global Sourcing at PAPAYA:Reduce purchasing costsIncrease the qualityReduce risks within the supply chainSecure innovations of top suppliers CZPT
Packing & Delivery Our most professional packagingTransport of large trucks to the seaportAnd international transport cooperationOur Service1. OEM Manufacturing welcome: Product, Package… 2. Sample order 3. We will reply you for your inquiry in 24 hours.4. after sending, we will track the products for you once every 2 days, NEMA 23 86BYG450ABC Hybrid Stepping Motor 86mm Stepper Motor Nema 42 Close Loop Hybrid Set 6.5 N.cm Max 4.0A Phase 2.4V R.K until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
FAQQ1. What is your terms of packing?A: Generally, we pack our goods in neutral WOODEN boxes and carton,steel hob.. If you have legally registered patent, we can pack the goods in your branded after getting your authorization letters. Q2. What is your terms of payment?A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance. Q3. What is your terms of delivery?A: EXW, FOB, CFR, CIF, DDU. Q4. How about your delivery time?A: Generally, it will take 5 to 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. Q5. Can you produce according to the samples?A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures. Q6. What is your sample policy?A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.Q7. Do you test all your goods before delivery? A: Yes, we have 100% test before delivery Q8: How do you make our business long-term and good relationship?A:1. We keep good quality and competitive price to ensure our customers benefit ; 370 12v 2700rpm 9000rpm small dc motor for rotary tattoo machine 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
drive shaft cv joint
editor by Cx 2023-07-07
China Brand new Pto Shaft Plastic Guard with great price pto shaft danger
Condition: New
Warranty: 1 Year
Applicable Industries: Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Retail
Showroom Location: None
Video outgoing-inspection: Provided
Machinery Test Report: Provided
Marketing Type: New Product 2571
Type: Shafts
Use: Tractors
Local Service Location: None
Agriculture Shaft: Tractor Shaft
PTO Drive Shaft: Spare Pats
32*76: Agriculture Shaft
Flexible Shaft: Couplings Shaft
PTO Shaft Plastic Guard: shaft coupling
pto shaft plastic guard Certificate: ISO9001
Packaging Details: Cartons or pallets
Port: ZheJiang or HangZhou Port
PTO Shaft Plastic Guard and PTO Shaft for different brands of agriculture machinery, such as tractor Johndeer, case,and newholland
PTO Shaft Plastic Guard and Shaft couplings for PTO Type: W 2400
1. U-Joint Size: 32*76
2. Joint Simple: /
3. Splined york: 101G57138
4. Tube york: Inner 102W35239 / Outer 103W35248
5. Tube: Inner 301L395 / 302L484
6. Operating Torque:
540 tr./min: 39 kw, 53 pk, 695 Nm
1000 tr./min: 61 kw, 83 pk, vacuum accessories 1200w BY2II- 230V n061300447 11me06t cleaner universal motor 580 Nm
7. Material: 20Cr or 20CrMnTi
Surface Hardness: 58-64HRC
Core hardness:20Cr: 25-45HRC / 20CrMiTi: 33-48HRC
Packaging & Shipping
Packaging Details: Cartons or pallets
Delivery Detail: 45-50days
Specifications
Machine PTO shaft
1) MOQ:50 sets
2) CE Certificate
3) Advanced equipment
Our Services
1) Competitive price and good quality
2) Used for transmission systems.
3) Excellent performance, long using life
4) Can develop according to your drawings or samples
5) Following the customers’ requirements or as our usual packing
6) Brand name: ZJWC or we can make according to every customer’s requirement.
7) Flexible minimum order quantity
8) Sample can be supplied
For more information about us, contact us right away.
We will do our best to meet your requrement of the product and provide the most perfected after-sales services for you.
Feel free to take a closer look around our pages, and if you have interested in, please enquiry to us your favorite items.welcome you connect with us or come to our factory to make order with sample for the good develepment of our distribution.
Company Information
We are factories specialized in manufacturing Tractor PTO Shaft, PTO Spare Parts with nearly 20 years. Our manual production quantity is more than 6000,000,000 sets. ISO9001 & 220V 70mm Permanent Magnets Synchronous speed Motor CE are our quality certifications.
Industry and Trade Integration
With CE certificate
Different Types of U-Joint used in the PTO Shaft
Forged yoke
Use for 15-120HP
Multitooth spline. Specifications from the 1 3 / 8 “Z6, 1 1 / 8” Z6, 1 3 / 4 “Z6, 1 3 / 8” Z20, 1 1 / 8 “Z20, 1 3 / 4” Faradyi High Torque Waterproof Permanent Magnet 24V Closed Loop Nema Mini Stepper Motor With Ball Screw For 3D Printer Z20, 1 3 / 8 “Z21 , 1 1 / 8 “Z21, 1 3 / 4” Z21, etc., complete specifications are welcome.
FAQFor more information about us, contact us right away.
We will do our best to meet your requrement of the product and provide the most perfected after-sales services for you.
Feel free to take a closer look around our pages, and if you have interested in, Shunli Customized rs 550 18v brushed motor with gearbox for mini vibrator motor adult toy please enquiry to us your favorite items.welcome you connect with us or come to our factory to make order with sample for the good develepment of our distribution.
drive shaft equipment
editor by Cx 2023-07-06
China Agriculture Machinery Parts 8 S8 1 38” Z6 Black Shear Bolt Yoke for PTO Shaft pto shaft bent
Problem: New
Guarantee: 6 Months
Relevant Industries: Accommodations, Garment Shops, Developing Content Stores, Producing Plant, Equipment Fix Retailers, Meals & Beverage Manufacturing unit, Farms, Cafe, Property Use, Retail, Meals Store, Design works , Energy & Mining, Foods & Beverage Stores, Other, Marketing Organization
Showroom Location: None
Online video outgoing-inspection: Offered
Equipment Examination Report: Provided
Advertising and marketing Type: Normal Merchandise
Kind: Yoke, Shear Bolt Torque Limiters
Use: PTO Generate Shaft
Product Name: Agriculture Machinery Components 8 S8 1 3/8” Z6 Black Shear Bolt Yoke
Colour: Black
Good quality: Large Quaity
Certification: ISO & CE
Usage: PTO Drive Shaft
Tooth: 1 3/8” Z6
Processing of Yoke: Forging
Horse Energy: 80
Substance: 45C
Right after Guarantee Service: Video complex assistance, Online assist
Neighborhood Service Location: None
Packaging Specifics: Plastic bag+ Woodencase + In accordance to Customer’s ask for
Port: ZheJiang or HangZhou
| Model Amount | 8SB 1 3/8” Z6 Black |
| Function | Drive Shaft Areas & Electricity Transmission |
| Use | Kinds of Tractors & Large Precision Color Aluminum 6mm Shaft Mounting Collars Farm Implements |
| Brand Title | 9K |
| Yoke Type | Double push pin,Bolt pins,Break up pins,Press pin,Quick release,Ball attachment,Collar….. |
| Processing Of Yoke | Forging |
| Plastic Include | YWBWYSBSEtc |
| Color | GreenOrangeYellowBlack Ect. |
| Series | T1-T10 L1-L6S6-S1010HP-150HP with SA,RA,SB,SFF,WA, Custom 750w 3kw 5kw cnc brushless servo motor 3 phase servomotor with driver CV Etc |
| Tube Variety | Lemon,Trianglar,Star,Square,Hexangular,Spline,Specific Ect |
| Processing Of Tube | Cold drawn |
| Spline Variety | 1 1/8″ Z61 3/8″ Z6 1 3/8″ Z21 1 3/4″ Z20 1 3/4″ Z6 8-38*32*6 8-42*36*7 8-48*forty two*8 |
| Place of Origin | HangZhou, China (Mainland) |
drive shaft yoke
editor by Cx 2023-07-04
China Agricultural Machinery Parts Splined Yoke flight yoke for pto shaft pto shaft for bush hog
Error:获取返回内容失败，
Your session has expired. Please reauthenticate.
wholesaler
editor by Cx 2023-07-03
China 1865836M91 PTO PLATE – 10 inch 25 SPLINE for replacing Massey Ferguson comer pto shaft
Condition: New
Warranty: 20000KM
Applicable Industries: Manufacturing Plant, 220V US-52 6W one period ac motor pace controller for YN60-6 Equipment Fix Retailers, 750W AC Servo Motor 220V 2.39N.m 3000RPM One Stage ServoMotors PulseEtherCATCANopen Servo Driver for CNC Machine Farms
Bodyweight (KG): 2.5 KG
Showroom Area: None
Video clip outgoing-inspection: Offered
Equipment Take a look at Report: Presented
Advertising and marketing Kind: Regular Product
Sort: Shafts
Use: Tractors
Dimension: 10 inch twenty five SPLINE
Packaging Information: carton/color box/and so on
Port: any port of china
Firm Introduction
We are the actual producer of clutch protect, china manufacture higher high quality 220v AC brushless servomotor para bordadora 550w servo motor for stitching device clutch disc, brake pad and brake shoe. We have been in the area of vehicle elements considering that 1996 and get pleasure from good track record all in excess of the world. Sincerely hope to aid you to discover out your solution right here. Your satifaction is our eternal focus on.
Workshop
Deal
Exhibition
Automechanika 2019 ZheJiang
carbon fiber drive shaft
editor by Cx 2023-06-30
China ATV forestry flail mulcher with honda motor wide angle pto shaft
Sort: Blades
Use: Tractors, Cutting grass
Merchandise Title: ATV Flail Mower
Certification: CE
Coloration: As you required
Guarantee: twelve months
Condition: Manufacturer new
Push Method: PTO shaft
Quality: Best
Package: Common exporting packing:metal crate
Major marketplace: Europe, North The united states, Australia and so forth.
Packaging Specifics: Standard exporting packing:steel crate
Port: ZheJiang
ATV forestry flail mulcher with honda motor
Specifications1. Zero defect inspection program make positive every single item with superb quality. 2. CE accredited. 3. European-design layout
ATV Flail Mower
Principal SPECIFICATION ON ATV MOWER:
| Product | AT120 |
| Dimensions (L×W×H) | 1760×1720×900mm |
| Composition Fat | 230Kg |
| Reducing WIDTH | one.15m |
| Doing work Effectiveness | 2100-2500m2/h |
| Energy Essential | 13HP |
Packaging & Shipping and delivery
| Packaging Information: | regular exporting packing:metal crate |
| Supply Element: | 35 function days soon after payment |
Company Details Aiemery Agri-equipment
Situated in HangZhou City, 2 several hours achieve to ZheJiang by vehicle. We are a professional company of a selection assortment of agricultural implements, these kinds of as all types of Mowers, Rotary tiller, Wooden chipper,Publish hole digger and so on.
Our business is established in 2571, Metal products, forging ring, forging shaft considering that then we have passed CE check. We have our own brand, also OEM acknowledged. In the earlier number of several years, we have established a very good function team. We have a number of engineers and high quality inspectors with much more than ten years’ knowledge in this spot. We will strictly abide by the theory of “client interests above all else”. We are strict with our top quality, we will inspect substance, effective process and solution very carefully. Now our items are exported to international markets
this sort of as the North American, Europe, Australian, and South American and so forth. Consequently, we have constructed extended phrase company interactions with buyers from all overthe entire world.
Offering ‘Quality Goods, Exceptional Services, Competitive Rates and Prompt Delivery’, JD1 Collection 220v Ac Motor Slip Gadget Speed Controller we are now searching CZPT to even higher cooperation with overseas consumers dependent on mutual advantages. Remember to really feel free of charge to speak to us for more information.
Factory show
Large Quality
In the previous handful of several years, we have recognized a excellent perform group. We have numerous engineers and
good quality inspectors with far more than ten years’ experience in this region.We are rigorous with our top quality,
we inspect substance, productive process and product carefully.
CE certification
Our company is recognized in 2571, because then we have passed CE test.
Location of our factory
Located in HangZhou Metropolis, 2 hours reach to ZheJiang by vehicle.
FAQ
1.Sample take a look at
It is okay for sample examination, and you can area a little order for testing.
two.Do you have after-income service?
Sure, all of our merchandise have twelve month good quality assurance to make confident that we offer you the very best good quality.
3.Can you print my manufacturer identify on it?
Of course of training course,you just need to send us the image of your brand name.
4.What is your payment phrase?
Normally thirty% T/T deposit once location an order and CZPT a contract, 70% balanced just before shipping and delivery or towards copy of B/L.
5.Can I combine diverse versions collectively?
Of course, you can combine diverse goods or models in 1x20ft or 1x40ft container and we will make the very best use of the container room.
six.Are your agri equipment suit for other model tractors?
Our 3 point technique and PTO shaft are developed according to worldwide requirements and will settle for all class 3 level implements.
Our Companies
drive shaft center bearing
editor by Cx 2023-06-29
China Agricultural Kubota Tractor Parts Driveline Yoke Tube Cover Steel Cardan Drive Pto Shafts With split Clutch for bush hog bush hog pto shaft
Error:获取返回内容失败，
Your session has expired. Please reauthenticate.
drive shaft yoke
editor by Cx 2023-06-28