Any harm about the teeth surfaces of a sprocket diminishes the existence on the conveyor chain.
With standard sprockets, significantly worn sprocket teeth have been repaired by teeth padding or the whole sprocket was replaced. In either situation, restore was expensive and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent replacement. This sprocket is highly rated by our consumers for the dramatic savings in expense and time.
Construction
The teeth could be replaced by two strategies: personal tooth substitute or sectional teeth replacement.
The bolts and nuts employed for mounting the teeth on to your sprocket are spot-welded to prevent loosening.
The respective structures are illustrated on the correct.
The above photograph as well as top correct illustration display a sprocket for individual tooth substitute. Since the joint encounter concerning the replaced teeth and also the sprocket is formed in a one of a kind arc, the bonding accuracy is large plus the sprocket power is enhanced. Additionally, because the load acting about the mounting bolts is decreased, there’s much less possibility of loosening. This sprocket building is patented.
You’ll find two sorts of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are applied for substantial sprockets obtaining heavy loads and welded sheet steel hubs for other applications.