Tag Archives: hydraulic machine

China Professional CNC Machine Hydraulic Shaft Machine Part Transmission Shaft Drive Shaft drive shaft carrier bearing

Product Description

Company  Profile

Established in 2009, HangZhou CZPT Trading Co., Ltd is a professional supplier for conveyor parts, located in ZHangZhoug province. We focus on supplying a variety of conveyor parts, including conveyor tubes, conveyor frames, conveyor rollers, bearing housings and so forth.

With our professional technology R&D team, and experienced quality control department, our products have been awarded the ISO9001 Quality Management System Standard and our main markets are in America, Europe, Asia and Australia.

Factory advantage

Professional and experienced technology team
All products inspected before shipping with reasonable prices
Low MOQ and free sample
We are audited by SGS and passed the ISO9001:2008 certification

Industries service

Industrial machine
Electronic and communication
Oil, gas,mining and petroleum
Construction industry
Equipment CNC Machining Center, CNC Lathes, CNC Milling Machines, Punching and drilling machines,  Stamping machines
Precision Processing CNC machining, CNC turning and milling, laser cutting, drilling, grinding, bending, stamping, welding

 

 

Roller size

 No. Standard Diameter Length Range
(mm)
Bearing Type
Min-Max
Shell Thickness of Roller
   mm Inch      
1 63.5 2 1/2 150-3500 203 204 3.0mm-4.0mm
2 76 3 150-3500 204 3.0mm-4.5mm
3 89 3 1/3 150-3500 204 205 3.0mm-4.5mm
4 102 4 150-3500 3.2mm-4.5mm
5 108 4 1/4 150-3500 306 3.5mm-4.5mm
6 114 4 1/2 150-3500 306 3.5mm-4.5mm
7 127 5 150-3500 306 3.5mm-5.0mm
8 133 5 1/4 150-3500 305 306 3.5mm-5.0mm
9 140 5 1/2 150-3500 306 307 3.5mm-5.0mm
10 152 6 150-3500 4.0mm-5.0mm
11 159 6 1/4 150-3500 4.0mm-5.0mm
12 165 6 1/2 150-3500 307 308 4.5mm-6.0mm
13 177.8 7 150-3500 309 4.5mm-6.0mm
14 190.7 7 1/2 150-3500 309 310 4.5mm-7.0mm
15 194 7 5/8 150-3500 309 310 4.5mm-8.0mm
16 219 8 5/8 150-3500 4.5mm-8.0mm

Advantage:
1.The life time: More than 50000 hours
2. TIR (Total Indicator Runout)
0.5mm (0.0197″) for Roll Length 0-600mm
0.8mm (0.571″) for Roll Length 601-1350mm
1.0mm (0. 0571 “) for Roll Length over 1350mm
3.Shaft Float≤0.8mm
4..Samples for testing are available.
5. Lower resistance
6. Small maintain work
7. High load capability
8. Dust proof & water proof

 

CONVRYOR ROLLER SHAFTS

We can produce roller shafts and We do customeized 
Product Size:φ10mm – 70mm
Max Length: 3000mm
Surface Tolerance: g6
Surface Roughness:0.8mm

 

Specification ASTM A108   AS1443
Steel Grade  Q235B,C1571,C1045(we can also do other steel grade per your requirments)
Size Φ18mm-φ62mm
Diameter Tolerance  ISO286-2,H7/H8
Straightness 2000:1

O.D  63.5-219.1mm
W .T  0.45-20mm 
Length  6–12m
Standard  SANS 657/3,ASTM 513,AS 1163,BS6323,EN10305
Material  Q235B, S355,S230,C350,E235 etc. 
Technique  Welded,Seamless
Surface oiled ,galvanized or painted with all kinds of colors according to client’s request.
 Ends  1.Plain ends,
 2.Threading at both side with plastice caps 
 3.Threading at both side with socket/coupling.
 4.Beveled ends, and so on
 Packing  1.Water-proof plastic cloth,
 2.Woven bags, 
 3.PVC package, 
 4.Steel strips in bundles 
 5.As your requirment
Usage   1.For low pressure liquid delivery such as water,gas and oil.
 2.For construction
 3.Mechanical equipment
 4.For Furniture 
Payment&Trade Terms  1.Payment : T/T,L/C, D/P, Western union 
 2.Trade Terms:FOB/CFR/CIF
 3.Minimum quantity of order : 10 MT (10,000KGS)
 Delivery Time  1.Usually,within10-20days after receiving your down payment.
 2.According to the order quantity 

 

Conveyor Roller Tube

Conveyor Roller Tube

Specification SANS657/3,ASTM513,AS1163,BS6323,EN10305 or equivalent international standard.
Steel grade S355/S230,C350,E235,Q235B
Sizes 63.5mm-219.1mm ect
Ovality tolerance of body ≤0.4mm(60.3mm-152.4mm)
≤0.5mm(159MM-168.3mm)
≤0.6mm(178mm-219mm)
Straightness 2000:1

 

 

 

if you are interesting in our products or want any further information, please feel free to contact us!

I am looking CZPT to your reply.

Best regards
Ruth
HangZhou CZPT TRADING CO., LTD 
1801 CZPT Building, No.268 Xierhuan Road, HangZhou City, ZHangZhoug Province, China

Surface Tolerance: G6
Surface Roughness: 0.8
Max Length: 3000mm
Standard: ASTM A108
Size: Od18mm—62mm
Steel Grade: C1018 C1020
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

air-compressor
hollow drive shaft

Hollow driveshafts have many benefits. They are light and reduce the overall weight of the vehicle. The largest manufacturer of these components in the world is CZPT. They also offer lightweight solutions for various applications, such as high-performance axles. CZPT driveshafts are manufactured using state-of-the-art technology. They offer excellent quality at competitive prices.
The inner diameter of the hollow shaft reduces the magnitude of the internal forces, thereby reducing the amount of torque transmitted. Unlike solid shafts, hollow shafts are getting stronger. The material inside the hollow shaft is slightly lighter, which further reduces its weight and overall torque. However, this also increases its drag at high speeds. This means that in many applications hollow driveshafts are not as efficient as solid driveshafts.
A conventional hollow drive shaft consists of a first rod 14 and a second rod 14 on both sides. The first rod is connected with the second rod, and the second rod extends in the rotation direction. The two rods are then friction welded to the central area of ​​the hollow shaft. The frictional heat generated during the relative rotation helps to connect the two parts. Hollow drive shafts can be used in internal combustion engines and environmentally-friendly vehicles.
The main advantage of a hollow driveshaft is weight reduction. The splines of the hollow drive shaft can be designed to be smaller than the outside diameter of the hollow shaft, which can significantly reduce weight. Hollow shafts are also less likely to jam compared to solid shafts. Hollow driveshafts are expected to eventually occupy the world market for automotive driveshafts. Its advantages include fuel efficiency and greater flexibility compared to solid prop shafts.

Cardan shaft

Cardan shafts are a popular choice in industrial machinery. They are used to transmit power from one machine to another and are available in a variety of sizes and shapes. They are available in a variety of materials, including steel, copper, and aluminum. If you plan to install one of these shafts, it is important to know the different types of Cardan shafts available. To find the best option, browse the catalog.
Telescopic or “Cardan” prop shafts, also known as U-joints, are ideal for efficient torque transfer between the drive and output system. They are efficient, lightweight, and energy-efficient. They employ advanced methods, including finite element modeling (FEM), to ensure maximum performance, weight, and efficiency. Additionally, the Cardan shaft has an adjustable length for easy repositioning.
Another popular choice for driveshafts is the Cardan shaft, also known as a driveshaft. The purpose of the driveshaft is to transfer torque from the engine to the wheels. They are typically used in high-performance car engines. Some types are made of brass, iron, or steel and have unique surface designs. Cardan shafts are available in inclined and parallel configurations.
Single Cardan shafts are a common replacement for standard Cardan shafts, but if you are looking for dual Cardan shafts for your vehicle, you will want to choose the 1310 series. This type is great for lifted jeeps and requires a CV-compatible transfer case. Some even require axle spacers. The dual Cardan shafts are also designed for lifts, which means it’s a good choice for raising and lowering jeeps.
air-compressor

universal joint

Cardan joints are a good choice for drive shafts when operating at a constant speed. Their design allows a constant angular velocity ratio between the input and output shafts. Depending on the application, the recommended speed limit may vary depending on the operating angle, transmission power, and application. These recommendations must be based on pressure. The maximum permissible speed of the drive shaft is determined by determining the angular acceleration.
Because gimbal joints don’t require grease, they can last a long time but eventually fail. If they are poorly lubricated or dry, they can cause metal-to-metal contact. The same is true for U-joints that do not have oil filling capability. While they have a long lifespan, it can be difficult to spot warning signs that could indicate impending joint failure. To avoid this, check the drive shaft regularly.
U-joints should not exceed seventy percent of their lateral critical velocity. However, if this speed is exceeded, the part will experience unacceptable vibration, reducing its useful life. To determine the best U-joint for your application, please contact your universal joint supplier. Typically, lower speeds do not require balancing. In these cases, you should consider using a larger pitch diameter to reduce axial force.
To minimize the angular velocity and torque of the output shaft, the two joints must be in phase. Therefore, the output shaft angular displacement does not completely follow the input shaft. Instead, it will lead or lag. Figure 3 illustrates the angular velocity variation and peak displacement lead of the gimbal. The ratios are shown below. The correct torque for this application is 1360 in-Ibs.

Refurbished drive shaft

Refurbished driveshafts are a good choice for a number of reasons. They are cheaper than brand new alternatives and generally just as reliable. Driveshafts are essential to the function of any car, truck, or bus. These parts are made of hollow metal tubes. While this helps reduce weight and expense, it is vulnerable to external influences. If this happens, it may crack or bend. If the shaft suffers this type of damage, it can cause serious damage to the transmission.
A car’s driveshaft is a critical component that transmits torque from the engine to the wheels. A1 Drive Shaft is a global supplier of automotive driveshafts and related components. Their factory has the capability to refurbish and repair almost any make or model of driveshafts. Refurbished driveshafts are available for every make and model of vehicle. They can be found on the market for a variety of vehicles, including passenger cars, trucks, vans, and SUVs.
Unusual noises indicate that your driveshaft needs to be replaced. Worn U-joints and bushings can cause excessive vibration. These components cause wear on other parts of the drivetrain. If you notice any of these symptoms, please take your vehicle to the AAMCO Bay Area Center for a thorough inspection. If you suspect damage to the driveshaft, don’t wait another minute – it can be very dangerous.
air-compressor

The cost of replacing the drive shaft

The cost of replacing a driveshaft varies, but on average, this repair costs between $200 and $1,500. While this price may vary by vehicle, the cost of parts and labor is generally equal. If you do the repair yourself, you should know how much the parts and labor will cost before you start work. Some parts can be more expensive than others, so it’s a good idea to compare the cost of several locations before deciding where to go.
If you notice any of these symptoms, you should seek a repair shop immediately. If you are still not sure if the driveshaft is damaged, do not drive the car any distance until it is repaired. Symptoms to look for include lack of power, difficulty moving the car, squeaking, clanking, or vibrating when the vehicle is moving.
Parts used in drive shafts include center support bearings, slip joints, and U-joints. The price of the driveshaft varies by vehicle and may vary by model of the same year. Also, different types of driveshafts require different repair methods and are much more expensive. Overall, though, a driveshaft replacement costs between $300 and $1,300. The process may take about an hour, depending on the vehicle model.
Several factors can lead to the need to replace the drive shaft, including bearing corrosion, damaged seals, or other components. In some cases, the U-joint indicates that the drive shaft needs to be replaced. Even if the bearings and u-joints are in good condition, they will eventually break and require the replacement of the drive shaft. However, these parts are not cheap, and if a damaged driveshaft is a symptom of a bigger problem, you should take the time to replace the shaft.

China Professional CNC Machine Hydraulic Shaft Machine Part Transmission Shaft Drive Shaft   drive shaft carrier bearing	China Professional CNC Machine Hydraulic Shaft Machine Part Transmission Shaft Drive Shaft   drive shaft carrier bearing
editor by CX 2023-08-28

Factory China f250 front drive shaft Wholesale 7 Inches Chipper, Safety Hydraulic Bx72r Woodworking Machine with ce certificate top quality low price

We – EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Factory  China  f250 front drive shaft Wholesale 7 Inches Chipper, Safety Hydraulic Bx72r Woodworking Machine with ce certificate top quality low price

Features:

1. This tractor wood chipper Max. chipping capacity is 7 inches.

2. With 24L hydraulic oil tank will avoid the hot hydraulic oil from tractor damaging the hydraulic hoses, directional valve, compensation valve and hydraulic motors.

3. The discharge chute can swivel 360 degrees.

Product Description:

TRACTOR REQUIREMENTS

The EPT BX72R requires a tractor at le EPT 40 hp. at the PTO. Of course, chipping capacity is directly related to horsepower and torque, therefore with 40 hp.

SLEEK HYDRAULIC HOSE CONFIGURATION

The hydraulic hose configuration for the BX72R has been streamlined to eliminate the possibility of snagging a hose and offers a sleek new look.

SELF CONTAINED HYDRAULICS

EPT BX72R chippers are complete with a self-contained hydraulic pump and a 24L Oil tank to power the two infeed motors. Hydraulics are not required from your tractor. 

VARIABLE SPEED DUAL HYDRAULIC INFEED MOTORS

Variable speed aggressive dual counter-rotating hydraulic-powered infeed rollers work together to pull material into the chipper head. This feature allows the user to slow or f EPT the infeed speed down to accept large material.

EASY SWIVEL DISCHARGE CHUTE

360 degrees of rotation and two-finger operation. We have incorporated a convenient handle that effortlessly allows you to swivel the discharge chute so that you can direct the chips into the back of a truck or trailer without having to move the entire machine. Simply push down on the handle and swing the chute. When you release the handle a spring-loaded pin drops down to lock the chute into position. No too EPT required.

Technical Specifications:

FAQ:

Factory  China  f250 front drive shaft Wholesale 7 Inches Chipper, Safety Hydraulic Bx72r Woodworking Machine with ce certificate top quality low price

Factory  China  f250 front drive shaft Wholesale 7 Inches Chipper, Safety Hydraulic Bx72r Woodworking Machine with ce certificate top quality low price