Product Description
Truck Spare Parts Transmission Gearbox 9JS150T-B for JAC Truck
Part Number | 9JS150T-B |
Name | The Gearbox for JAC Trcuk |
Max. Torque | 1500N.m |
Rated Speed | 2600rpm |
Packing | wooden box |
Quality parts | Original; OEM |
ZheJiang Man Truck International Trading Co.,Ltd can supply full parts of all Chinese brand heavy trucks (including concrete mixer truck parts) and engineering machinery parts.
Truck Body and Body Components Parts
S/N | Products Range |
1 | Cab Body ASSY, Locking Mechanism, Limiting Device |
2 | Cab floor, Bumpers, Fender & Rear Fender, Air spring… |
3 | Cab Door, Fog Light, Sun Visor, Hydraulic Lock Assembly… |
4 | Steering Column, Front & Rear Glass, Wind-shield Wiper & washer… |
5 | Window, Roof Panel, Air Heater system… |
6 | Air Conditioner System, Safety Belt, Take Power Off… |
Electrical and Electronic System
S/N | Products Range |
1 | Battery, Auto Horn, Regulator, Flasher, Relay… |
2 | Electric Equirments, Sensor, Water Level Buzzer… |
3 | Switch, Anti-theft Device, Signal Device, Motor meter… |
Engine Parts
S/N | Products Range |
1 | Cylinder Head, Cylinder Liner, Crankshaft, Rod… |
2 | Piston, Piston Ring, Piston Pin, Piston Cooling Nozzle… |
3 | Oil Fitter, Fuel Filter, Water Filter… |
4 | Oil Pump, Water Pump, Injection Pump, Transfer Pump, turbo charger… |
5. | Main bearing, con.rod bearing, fly wheel, fuel tank, overhaul repair gasket kit… |
Gearbox parts
S/N | Products Range |
1 | gearbox, Gearbox housing, top cover, Primary shaft, Main shaft… |
2 | Countershaft, 2 / 3 gear, 2nd speed gear(1/2/3/4/5… |
3 | reverse gear ,clutch bearing and seat, synchronize assembly…. |
4 | synchronizer slider, synchronizer ring, gearbox shell…. |
5 | gearbox cover, shift fork assy, PTO, bearing, oil seal, repair bag… |
Chassis parts:
S/N | Products Range |
1 | front axle, steering knuckle, repair bag, tie rod end, drag link, steering tie rod…. |
2 | straight joint, shock absorber, wheel blot, leaf spring assy, wheel hub, gimbal yoke… |
3 | centrale bearing, cross universal joint, transmission shaft, final drive, differential device assy… |
4 | bearing, brake drum, wheel rim, brake shoes,brakd pads, hand brake drum, repair bag, clutch pump,.. |
5 | brake pump,oil pipe, vacuum booster, buffering rubber, oil seal, power steering box, oil sensor.. |
Every part has 3 kinds of grade:
1. Original parts
2. OEM Parts
3. Copy Parts
It can satisfy distributor to get profits and transporter to get high quality. All the products are certified to ISO9001 international quality standards.
Our sevice:
1.Customized design, logo, color
2. Long term after-sale service
3. Multi payment terms
4. Multi delivery terms
Type: | Gearbox |
---|---|
Certification: | ISO9001 |
Transmission System Parts: | Gearbox |
Steering System Parts: | Steering Gear |
Color: | Black |
Main Market: | Asia, Africa, Europe, Austrilia |
Power Take-Off (PTO) Shafts
Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.
Power take-off (PTO) shaft
The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.
Types
There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.
Connections
A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.
Safety
It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.
Maintenance
One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
editor by CX 2023-04-22
China manufacturer & factory supplier for china in Turin Italy manufacturer BKM0903 automatic transmission hypoid gearbox for agricultural machinery With high quality best price & service
ISO 9001 accredited maker of precision roller chains. Sorts consist of solitary and multiple strand, hollow pin, facet bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless metal, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains.In 2000, EPG took the direct in getting ISO14001 environment management certification and thereafter handed the inspection of cleanse production and recycling financial system, winning the title of “Zhejiang Environmentally friendly Company”.
Overview
Rapid Particulars
- Applicable Industries:
-
precision equipment
- Gearing Arrangement:
-
Hypoid
- Output Torque:
-
300~five hundred N.m
- Input Pace:
-
≤1500 rpm
- Output Velocity:
-
*
OUR Large-Stop Section: Locating THE Best Solution FOR THE Customer The higher-stop segment typically needs personalized options. In these instances, we give you with in-depth consulting in buy to devise a frequent resolution to fulfill your needs. Only then do we get down to the real work.
- Spot of Origin:Zhejiang, China
- Brand Identify:
-
OEM
- Merchandise identify:
-
hypoid gearbox
- Ingress Safety:
-
IP65
- Ratio:
-
7.5~sixty
- Coloration:
-
gray /blue/black
- Warmth therapy:
-
surface hardening
- Housing Content:
-
aluminum alloy
EPG major production is of farming 15-five hundred horsepower tractor supporting machinery, mechanical cultivation, harvesting equipment and equipment.
Offer Potential
- Supply Potential:
- 200000 Piece/Pieces for each Thirty day period
Packaging & Delivery
- Port
- Ningbo/Shanghai/ China Port
-
Guide Time
: -
Amount(Sets) 1 – 1000 >1000 Est. Time(days) thirty To be negotiated
Online Customization
Ever-electrical power Team Co., Ltd. is Professional IN Making ALL Kinds OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Equipment Speed REDUCERS, PARALLEL SHAFT HELICAL Equipment REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Gear REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Vehicle GEARBOXES, PTO Push SHAFTS, Special REDUCER & Relevant Gear Parts AND OTHER Related Items, SPROCKETS, HYDRAULIC Technique, VACCUM PUMPS, FLUID COUPLING, Gear RACKS, CHAINS, TIMING PULLEYS, UDL Velocity VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Equipment PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Low BACKLASH WORM REDUCERS AND SO ON. Additionally, WE CAN Produce Personalized VARIATORS, GEARED MOTORS, Electrical MOTORS AND OTHER HYDRAULIC Goods According TO Clients DRAWINGS.
HangZhou Ever-PowerMechanical & Electrical Co., Ltd. is a professional manufacturer ofgearbox and motors.The factory covers an region of 20,000 square meters, the creating area of 30,000 sq. meters, the tThe lemon tube is suited for transmissible energy of 16-35HP, it is the favored selection for high speeds and reduced torque transmission. The two-lobe lemon tube grants minimal vibrations up to 2600 rpm with lengths not exceeding 800mm. AC series with six-lobe tubes (star)otal amount of staff is more than two hundred .We have passed theISO9001:2015international high quality administration program standard certificate,CCCnationwide compulsory item certificate andCEcertification . We have created innovative administration software this kind of asERPto keep speed with global normal.In order to serve consumers far better the firm actively cooperates with faculties and universities to create new items and boost existing products .
Q1. Are you trading business or maker? A. We are manufacturer Located in Taizhou Town of East China. Q2. How is promise of the quality? With ISO9001:2015,CE,CCC certificated, Our inspectors sampled examine and report content and semi-concluded spare areas. And – 100% examine completed spare elements prior to place in storage. – 100% examine before assembly. – a hundred% inspect just before packaging. Q3. What data shall we give prior to placing a obtain get? We can source complex assist and the drawing in accordance to your need if you get in touch with with me. This fall. What industries are your gearboxes getting utilized? Our gearboxes are broadly utilized in the places of textile, foods processing, beverage, chemical industry,escalator,automatic storage tools, metallurgy, tabacco, environmental safety, logistics and and many others. Q5. Do you have guarantee support? Sure, the gearbox is totally free warranty inside of 1 several years following delivery. |
Best China manufacturer & factory B in Almaty Kazakhstan series high power bevel speed gear reducer drive power transmission gearbox industrial gearbox for concrete mixer With high quality best price
With many years’ experience in these lines, we have been distinguished from other suppliers in China by our advantages in competitive pricing, on-time delivery, prompt responses, on-hand engineering support and good after-sales services.
Overview
Quick Details
- Applicable Industries:
-
Building Material Shops
- Gearing Arrangement:
-
Helical
- Output Torque:
-
470000Nm
- Input Speed:
-
750-1500rpm
- Output Speed:
-
1.7~1200rpm
-
Most commonly, it is a splined drive shaft installed on a tractor or truck allowing implements with mating fittings to be powered directly by the engine.
- Place of Origin:Zhejiang, China
- Brand Name:
-
OEM
- Certification:
-
ISO9001-2008
- Mount Position:
-
Foot Mounted
- Bearing:
-
C&U
Supply Ability
- Supply Ability:
- 500 Unit/Units per Month
Packaging & Delivery
EPG is specialized in design, manufacturer and sales of agricultural machinery and farm implements, which has an independent import and export rights.
- Packaging Details
- Standard wooden case
- Port
- Ningbo Port, ShanghaAside from gear ratio, the most important factor that determines efficiency is the contact pattern between worm and mating gears. Manufacturing the reducer housing, and worm and gear subassemblies creates a stack up of tolerances, so the position of the gear-tooth centerline cannot be accurately predicted. Therefore, assemblers must manually measure and adjust the contact pattern by varying the position of shims behind the front and rear bearings on the output gear shaft. This is timeconsuming and costly, so most manufacturers use statistical analysis to predict shim quantity and location. This provides a reasonably centered contact pattern most of the time.i Port
-
Lead Time
: -
Quantity(Boxes) 1 – 1 >1 Est. Time(days) 20 To be negotiated
Online Customization
B series high power bevel speed gear reducer drive power transmission gearbox industrial gearbox for concrete mixer
Product Description
H/B series high power speed gear reducer industrial gearbox for concrete mixer has the features of high versatility,good combination and heavy loading capability, along with other merits such as easy to attain various transmission ratios, high efficiency, low vibration and high permissible axis radial load.
1) Output speed: 1.7~1200r/min
2) Output torque: up to 47,000N.m
3) Motor power: 2.52~5366kW
4) Mounted form: foot-mounted ,flange-mounted, axis mounted, shrink mounted
Product Name |
H/B series high power speed gear reducer industrial gearbox for concrete mixer |
Housing Material |
HT 250 Cast Iron |
Gear Material |
20CrMnTi |
Shaft Material |
20CrMnTi |
Gear Processing |
Grinding finish by HOFLER Grinding Machines |
Color |
Customized |
Noise Test |
Bellow 65dB |
Warranty |
1 year |
Company Information
Certifications
Our Services
Packaging & Shipping
Related Products
FAQ
: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Contact us
Best China manufacturer & factory H series high power speed reducer gearbox transmission helical spiral bevel worm gear reduction boxes helical gear reduction With high quality best price
Hangzhou EPG Co.,Ltd. , was founded in November, 1997. With its five wholly owned subsidiaries.
Overview
Quick Details
- Applicable Industries:
-
Building Material Shops, Manufacturing Plant, Machinery Repair Shops, high power gearbox reducer
- Gearing Arrangement:
-
Helical
- Output Torque:
-
470000Nm
- EPG Machinery is located in XiHu Area HangZhou Zhejiang ,China. It is 30km from our factory to HangZhou international airport.
Input Speed: -
750-1500rpm
- Output Speed:
-
1.7~1200rpm
- Place of Origin:Zhejiang, China
- Brand Name:
-
OEM
- Certification:
-
ISO9001-2008
- Mount Position:
-
Foot Mounted
- Bearing:
-
C&U
- gear precision grade:
-
din 4
Supply Ability
- Supply Ability:
- 500 Unit/Units per Month
Packaging & Delivery
- Packaging Details
- Standard wooden case
- Port
- Ningbo Port, Shanghai Port
-
Lead Time
: -
Quantity(Boxes) 1 – 1000 >1000 Est. Time(days) 35 To be negotiated
Slip Clutch PTO Shaft for Compact Tractor Tillers NEW SLIPCLUTCH PTO SHAFT FOR COMPACT TRACTOR TILLERS ROTO TILLERS BUSHHOG RHINO KINGKUTTER,CARONI,MASCHIO,JOHN DEERE, MOST MODELS three different types of PTO in operation: a non shear, shear pin and slip clutch — the last being the most expensive. Implement end of non shear (r) and shear type (l) Non shear: this is a solid yoke to yoke set up and used with the expectation that certain equipment will not encounter any sudden stops. I figure that the finishing mower does not need a shear set up as the blades will slip to a degree being belt driven and my other mower, the flail mower, is extremely forgiving in its design.
Online Customization
Product Description
CLICK HERE FOR MORE DISCOUNTS!
Advantage:
SLH series high power speed reducer has the features of high versatility,good combination and heavy loading capability, along with other merits such as easy to attain various transmission ratios, high efficiency, low vibration and high permissible axis radial load.
Specifications:
1) Output speed: 1.7~1200r/min
2) Output torque: up to 47,000N.m
3) Motor power: 2.52~5366kW
4) Mounted form: foot-mounted ,flange-mounted, axis mounted, shrink mounted
Related product
Company Profie
SPECIALIST IN MAKING ALL KINDS OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL GEAR SPEED REDUCERS, ARALLEL SHAFT HELICAL GEAR REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM GEAR REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, AUTO GEARBOXES, PTO DRIVE SHAFTS, SPECIAL REDUCER & RELATED GEAR COMPONENTS AND OTHER RELATED PRODUCTS, SPROCKETS, HYDRAULIC SYSTEM, VACUUM PUMPS, FLUID COUPLING, GEAR RACKS, CHAINS, TIMING PULLEYS, UDL SPEED VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, GEAR PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS LOW BACKLASH WORM REDUCERS AND SO ON. FURTHERMORE, WE CAN PRODUCE CUSTOMIZED VARIATORS, GEARED MOTORS, ELECTRIC MOTORS AND OTHER HYDRAULIC PRODUCTS
ACCORDING TO CUSTOMERS’ DRAWINGS.
Certifications
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.
If you have another question, please feel free to contact us.
Packing & Delivery
Why Choose Us
Also I would like to take this opporOur unparalleled research and development expertise is also reflected in our solutions: from low-backlash planetary gearboxes through servo right-angle gearboxes and complete drive units to EPG ® 5, our fundamentally redesigned sizing software. More than a million of our units are in use around the world – for example in machine tools and production systems, food and packaging machines, wood processing machines, robotics, transportation, automation and handling technologies.tunity to give a brief introduction of our Ever-Power company:
Our company is a famous manufacturer of agriculture gearbox,worm reduce gearbox, PTO shafts, Sprockets ,rollar chains, bevel gear, pulleys and racks in china.
We have exported many products to our customers all over the world, we have long-time experience and strong technology support.
Some of our customer :
Italy: GB GEABOX, SATI, CHIARAVALLI, AMA, Brevini
Germany: SILOKING ,GKN ,KTS
France: Itfran, Sedies, Kuhn
Brazil: AEMCO ,STU
USA: John Deere , BLOUNT, Weasler, Agco, Omni Gear, WOODS
Canada: JAY-LOR , CANIMEX ,RingBall
……
-> Our Company with over twelve year’s history and 1000 workers and 20 sales.
-> With over 100 Million USD sales in 2017
-> With advance machinery equipments
-> With large work capacity and high quality control, ISO certified.
……
you also can check our website to know for more details, if you need our products catalogue, please contact with us.
For more detail, please contact us. |
For more detail, please contact us.
Best China manufacturer & factory Power Transmission worm gearbox With high quality best price
In 2008, it was awarded with “National Export Commodity Inspection-free Enterprise”.
Overview
Quick Details
- Applicable Industries:
-
Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, farms
- Place of Origin:Zhejiang, China
- Brand Name:
-
OEM
- Gearing Arrangement:
-
worm
- Output Torque:
-
4.5-2590N
- Input Speed:
-
1400rpm
- Output Speed:
-
14-280rpm
- Model Number:
-
FCNDK
- Rated Power:
-
0.06-15KW
-
Series B Right Angle Worm GearEPG Drive Series B Right Angle Worm Gear
- Item:
-
Power Transmission worm gearbox
Supply Ability
- Supply Ability:
- 10000 Piece/Pieces per Month
Packaging & Delivery
- Packaging Details
- Standard export packing and wood pallets packing
- Port
- Shanghai or Ningbo Port
Online Customization
Detailed Images
Detailed Images of Power Transmission worm gearbox
Packing & Delivery
Packing Images of Power Transmission worm gearbox
Inner Packing: PP bag with carton;
OIn our sales program we offer standard and wide-angle PTO drive shafts. Regarding the customers’ needs there are different sizes, lengths and safety elements (clutches) available.uter Packing: Wooden case;
Shipment: 14-20 days upon receiving the deposit.
Related Products
SEW Type Gearbox with Motor
FR Helical Gearbox with Motor
Cast Iron Worm Gearbox
Bonfiglio Type Shaft Mounted Gearbox
SMR Shaft Mounted Gearbox
Dodge TXT Type Shaft Mounted Gearbox
About Us
Ever_power GROUP is the first and largest worm gearbox manufacturer in China, established in 1976, specialising in the production of a wide variety of transmission machinery. With more than 40 years experience in the industry, our assets now total 117.2 million dollars, and we have 2 subsidiary companies, 8 holding companies, and 12 joint-stock companies.
We can produce 400,000 units of worm gearboxes, 100,000 units of gear reducers, 50,000 units of other speed reducers, 150,000 units of flexible couplings, and 100,000 units of speed-reducer accessories every year.
70% of our products have been exported to 40 more countries, and our customers come from Italy, Germany, USA, Canada, Spain, UK, India, Mexico, Brazil, Argentina, Turkey, Singapore and other main industrial countries. 30% of them are OEM made for direct manufacturers of other products.
FAQ
Q1. Is your quality good?
A1: Quality Adhering to “Survival by Quality, Development by Technology & Credit”, The company will constantly improve product performance to meet the increasing customer requirements in the rigorous style of work. never tell lies, we’re the largest manufacturer and exporter of worm gear reducer in Asia, the first reducers and gearboxes manufacturer in China, who has been given license since 1993. Also, we had achieved ISO9001 and CE Certificate among all manufacturers.
Q2. How is your price? Can you offer any discount?
A2: We will give the best price we can base on your needs and the quantities.
Q3. Do you offer any visiting?
A3: Yes! We sincerely invite you to visit us! We can pick you from airport, railway station and so on. Also, we can arrange housing for you. Please let us know in advanced.
Q4. When is the best time to contact you?
A4: You can contact us by email any time, we will reply you ASAP. If you want contact by phone, our working hour is Mon-Sat 9am-17:30pm.
Contact
Ever_power GROUP
Address: No.789-B8Shenhua Road, XiHu Dsitriction Enco&Tech Development Zone HangZhou City, ZJ, P.R.
Tel: 0086-571-88220971/Mob: +86 13083988828
WhatsApp/Skype: +86 13083988828
Website: www.hzpt.com
hypoid Lowest price aluminum Alloy micro gearbox drive gearbox prices gearbox motor motor tricycle reverse gear power transmission
In 2000, EPG took the direct in gaining ISO14001 atmosphere administration certification and thereafter handed the inspection of thoroughly clean creation and recycling economy, successful the title of “Zhejiang Eco-friendly Business”.
Overview
Rapid Information
- Applicable Industries:
-
Constructing Content Shops
- Gearing Arrangement:
-
Hypoid
- Output Torque:
-
100~750N.m
- Enter Velocity:
-
1400rpm
- Output Speed:
-
four~187RPM
- Area of Origin:Zhejiang, China
- Model Title:
-
OEM
- Color:
-
Blue / Grey / Consumer need
Supply Capability
- Provide Ability:
- 5000 Established/Sets per Month
Packaging & Delivery
- Packaging Information
- 1 established in 1 Carton,then place in massive picket.
- Port
- Shanghai/Ningbo port
-
Lead Time
: -
Amount(Bins) one – 1 >1 Est. Time(days) twenty To be negotiated
On the web Customization
Product Description
hypoid aluminum Alloy micro gearbox travel gearbox prices gearbox motor motor tricycle reverse equipment electrical power transmission
one. Generate by hypoid gear, has big ratios.
two. Massive in output torque, high performance, strength preserving and environmental defense.
3. Created of higher top quality aluminum alloy, light in excess weight and non-rusting
four. Sleek in operating and low in sounds, can function lengthy in dreadful circumstances.
five. Great-searching in visual appeal, tough in support existence and little in volume.
6. Appropriate for all spherical set up, vast software and effortless of use.
seven. The Mounting Dimension of BKM series are suitable with NMRV series worm equipment device (A element of NMRV050 proportions are diverse from BKM050)
eight. Modular and multi-construction can meet up with the requires of various problems.
Company Details
Packing&Delivery
Packing Particulars: Standard carton/Pallet/Common picket scenario
Supply Particulars : fifteen-thirty operating times upon payment
Our Certifications
Relevant Item
Precision Planetary gearbox | Robotic RV gearbox speed reducer |
Custom produced Non-regular Gearbox | UDL Collection Variator |
PYZ Sequence Helical Tooth Shaft Mounted Reducer | 8000 Collection Cycloidal Reducer |
SLT Series Spiral Bevel Gearbox | SLSWL Sequence Worm Screw Jack |
SLP Sequence Planetary Reducer | SLH/SLB Sequence Substantial Electrical power Reducer |
NMRV Series Worm Reducer | BKM Collection Helical-hypoid Reducer |
SLRC Series Helical Reducer | SLSMR Collection Shaft Mounted Reducer |
SLXG Series Shaft Mounted Reducer | X/B Series Cycloidal Reducer |
SLR/SLF/SLK/SLS Series Helical Reducer | AC/DC Motor |
FAQ
1.Payment Time period: TT, L/C
two.Delivery time: about 30 days from get payment.
three.We take tailored goods as for every your unique necessity.
4.Recommendations for the Choice:Usually we can choose one machine which is suited for you with some informations from you,this sort of as ratio/motor velocity/mounting dimension/ out torque and so on.
5.If the minimum get sum is in excess of $10000, there are preferential.
Q1: What data should I explain to you to validate the merchandise?
A:Model/Dimensions, Transmission Ratio, Shaft instructions & Get quantity.
Q2: What can i do if I do not know which one particular I need?
A:Dont fear, Send as significantly details as you can, our team will support you discover the appropriate a single you are seeking for.
Q3: What is your solution guarantee period?
A:We offer you 1 12 months guarantee because the vessel departure date remaining China.
Q4: Are you investing company or producer ?
A: We are manufacturing unit.
Q5: How extended is your supply time?
A: Normally it is five-ten days if the products are in stock. or it is 15-20 days if the products are not in stock, it is in accordance to quantity.
Qsix: Do you supply samples ? is it cost-free or additional ?
A: Sure, we could offer you the sample for free of charge cost but do not pay the value of freight.
Q7: What is your conditions of payment ?
A: Payment=1000USD, 30% T/T in progress ,balance ahead of shippment.
If you have any other questions, make sure you really feel free of charge to speak to us as demonstrated below, you can simply click on the picture beneath to speak to me directly.
Contact Us