General Description
Outfitted using the zero leak bidirectional checking sole-noid valves, this electrical power unit is developed for that operation of two independent circuits. Which are respectively for that key and subordinate platforms of the double scissors lift. Two cut-off valves are used for reducing the machine manually in situation of electrical power loss. If much more independent circuits are required to your application please get hold of us for availability.
Remark: 1. Please check with our sales engineer for that unique pump displacement, motor energy or tank capability.
two. CSA or UL licensed motors can be found upon request.
Unique Notes
1. The AC motor is of S3 duty cycle, which could only function intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean each of the hydraulic elements concerned ahead of installation of the electrical power unit.
3. Viscosity of the oil shoud be 15~46 cst,plus the oil must be clean and free of charge of impurities,N46 hydraulic oil is proposed.
4. The energy unit really should be mounted vertically.
five. Check the oil level while in the tank right after the initial operating of the power unit.
six. Oil altering is needed following the preliminary a hundred operation hours,afterwards when each and every 3000 hrs.