We If you are fascinated in any of our merchandise or would like to talk about a likely purchase, you should really feel totally free to make contact with us. – EPG Group the most significant agricultural gearbox and pto manufacturing facility in China with 5 distinct branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
PPR Pipe Constructing H2o Tube Plasic Extruder Equipment Producing line
HDPE Pipe Software:
Agricultural Irrigation h2o provide&Sweage drainage pipe&Discharge technique&Gas supplly program&Architectural drinking water source.
Production Flow of Pipe Generation Line:
Material →Color Mixer →Automatic Feeder→Hopper Dryer →Single Screw Extruder →Extrusion Mould & Calibrator → Vacuum Calibration Cooling Tank → Spray Cooling Tank →Printer → Haul-off Unit →Cutter →Stacker or Coiler
Characteristics of Pipe Machiner:
one- 30m/min of highest lineal extrusion speed, large capability and minimal power intake, and achieved multi- layers co extrusion with 1-5 layers.
2- The copper bush is much more dress in-resisting and avoid materials leakage which can ensure a steady operating of extruder.
3- Substance feed through spiral groove, efficient transmission and can effectively reduce back-stress on extruder.
4- Special style (barrier, shearing and mixing zone) ensures a uniformed plasticizing influence, and can decrease the pressure on the screw which assures a high velocity and stable output potential.
five- Higher torque equipment box has a smart figuration, compact development, reduced sounds, hello pto gearbox makers Manila Philippines gh carrying potential, higher transmission efficiency can guarantee extended-time difficulty-free procedure
six- PCA(pipe air cooling system) of die head largely improve the extrusion velocity and decrease the cooling length of extrusion line, and improve quality of internal pipe floor
seven- Intelligent PLC managing technique with human-pleasant interface make the procedure simply and conveniently
8- Chip-cost-free cutter ensuing flat and sleek cutting surface of pipe.
Main Technical Parameter:
| Machine model |
Pipe diameter | Vacuum Calibration Tank | Spray Cooling Tank | Haul-off unit | cutter | ||||
| Vacuum pump | H2o pump |
Length(mm) | H2o pump |
Duration(mm) | caterpillar Quantity | Motor | Cutting type | ||
| HDPE63 | φ16mm-φ63mm | 3kw*two | 3kw*two | 6000mm | 3kw*1 | 6000mm | two | one.5kw*2 | No dust cutter |
| HDPE-one hundred ten | Φ40mm-φ110mm | 4kw*2 | 3kw*two | 6000mm | 3kw*one | 6000mm | two | 3kw | No dust cutter |
| HDPE-one hundred sixty | Φ50mm-φ110mm | 4kw*2 | 4kw*2 | 6000mm | 4kw*one | 6000mm | 3 | 1.1*three | Planetary cutter |
| HDPE-250 | Φ75mm-φ250mm | 5.5kw*2 | five.5kw*two | 6000mm | 4kw*1 | 6000mm | 3 | 1.1kw*3 | Planetary cutter |
| HDPE-315 | Φ110mm-φ315mm | five.5kw*2 | 5.5kw*two | 6000mm | five.5kw*1 | 6000mm | four | one.1kw*4 | Planetary cutter |
| HDPE-630 | Φ315mm-φ630mm | seven.5kw*two | 7.5kw*2 | 6000mm | seven.5kw*one | 6000mm | 6 | one.1kw*six | Planetary cutter |
| HDPE-800 | Φ400mm-φ800mm | 5.5kw*2(2m) | five.5kw*2(2m) | 6000mm | 5.5kw*two | 6000mm | 8 | 1.1kw*8 | Planetary cutter |
| 7.5kw*2(10m) | 7.5kw*2(10m) | ||||||||
| HDPE-1200 | Φ630mm-φ1200mm | five.5kw*two | seven.5kw*two | 6000mm | seven.5kw*2 | 6000mm | ten | 1.1kw*ten | Planetary cutter |
Device photograph:
Extrusion machine
Vacuum Calibration Cooling tank & Spray Cooling tank
Haul-off Unit
Planetary Car-Cutter
Plastic Pipe Stacker
If you have any concerns, remember to get in touch with us:
Mob/Watsap/Wchat:+86 18915692496
The use of original products manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our firm and the detailed replacement elements contained herein are not sponsored, accepted, or created by the OEM.
