Product Description
Tractor parts Agricultural Pto Shaft Connect Parts Cardan Drive shaft Yoke U Joint Front splined slip yoke Of CHINAMFG Engine
Product Description
Products Description
1.Forged high quality alloy steel cross is case hardened to provide good wear resistance and maximum service life. Pre-installed grease fitting in the cross saves time, prevents installation damage and allows for easy U-Joint maintenance.
2.Forged high strength steel cups are case hardened for strength and durability. Cup face and outer diameter are precision ground to provide precise fit, lock up and balance ability.
3.High carbon steel needle bearings are through hardened and precision ground using a optimized crowning profile for maximum life and load carrying capacity.
4.Seals are made out of high quality nitrile rubber for optimal grease retention and contaminant exclusion. Multi-lip seal is pliable, yet tough and tear resistant.
5.All U-Joints are pre-lubricated with a premium, high temperature grease that performs well in a wide temperature range and provides a long service life.
Company Profile
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Installation Guide |
|---|---|
| Warranty: | 6 Years |
| Condition: | New |
| Color: | Natural Color |
| Certification: | CE |
| Structure: | Single |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do PTO shaft yokes handle variations in load and torque during operation?
PTO shaft yokes are designed to handle variations in load and torque during operation, providing a reliable and efficient power transmission between the power source and the implement. Here’s how they handle these variations:
1. Flexible Coupling: PTO shaft yokes serve as a flexible coupling between the power source and the implement. This flexibility allows them to accommodate variations in load and torque. As the implement encounters changes in resistance or load, the PTO shaft yoke flexes slightly, absorbing the shocks or fluctuations. This flexibility helps prevent excessive stress on the driveline components and ensures smoother operation.
2. Slip Clutches: Some PTO shaft yokes incorporate slip clutches as a safety feature to handle sudden increases in torque or overload conditions. Slip clutches allow controlled slippage between the yoke and the PTO shaft, protecting the driveline from damage. When the torque exceeds a certain threshold, the slip clutch disengages, allowing the yoke to slip momentarily, absorbing the excess torque. Once the torque decreases to a safe level, the slip clutch re-engages, restoring power transmission.
3. Torque Limiters: Torque limiters are another mechanism used in certain PTO shaft yokes to handle variations in torque. These devices are designed to limit the amount of torque that can be transmitted through the yoke. In high-torque situations, such as encountering a sudden resistance, the torque limiter disengages, preventing excessive torque from reaching the driveline and protecting the equipment from damage.
4. Shear Pins: Some PTO shaft yokes utilize shear pins as a sacrificial weak point in the power transmission system. Shear pins are designed to break under excessive load or torque, disconnecting the yoke from the PTO shaft. This helps protect the driveline and other components from damage. Shear pins can be easily replaced, restoring the yoke’s functionality.
5. Adjustments and Calibration: In certain cases, operators can make adjustments or calibrations to PTO shaft yokes to optimize their performance based on the specific load and torque requirements. This may involve adjusting the clutch engagement settings, changing gear ratios, or modifying the power source’s speed to achieve the desired power output.
By incorporating flexible coupling, slip clutches, torque limiters, shear pins, and offering adjustment options, PTO shaft yokes effectively handle variations in load and torque during operation. These features help protect the driveline, prevent equipment damage, and ensure efficient power transmission in a wide range of applications.
What are the common signs of wear or damage that indicate a need for PTO shaft yoke replacement?
PTO shaft yokes, like any mechanical component, can experience wear or damage over time. Several common signs indicate the need for PTO shaft yoke replacement. These signs include:
1. Excessive Play or Looseness: If you notice excessive play or looseness in the PTO shaft yoke connection, it could indicate wear or damage. The yoke may no longer fit securely on the PTO shaft or the driven equipment, compromising its ability to transmit power effectively.
2. Visible Cracks or Breaks: Inspect the PTO shaft yoke for any visible cracks, fractures, or breaks. These can occur due to excessive stress, impact, or fatigue over time. Cracks or breaks weaken the structural integrity of the yoke and can lead to total failure, necessitating replacement.
3. Damaged Splines: The splines on the inner surface of the PTO shaft yoke should be inspected for any signs of damage. This includes worn-out or stripped splines, which can occur due to improper engagement, misalignment, or excessive torque. Damaged splines can result in poor power transmission and may require yoke replacement.
4. Excessive Wear on Bore or Spline Area: Check the bore and spline area of the PTO shaft yoke for signs of excessive wear. This can manifest as elongated or enlarged bore holes, worn-out splines, or significant material loss. Excessive wear can lead to poor fitment, reduced power transmission efficiency, and potential failure.
5. Corrosion or Rust: PTO shaft yokes are often exposed to environmental conditions that can cause corrosion or rust. Inspect the yoke for any signs of corrosion, especially in areas where the yoke comes into contact with moisture or chemicals. Corrosion weakens the yoke’s structural integrity and can affect its performance, requiring replacement.
6. Irreparable Damage: In some cases, the PTO shaft yoke may sustain irreparable damage, such as severe deformations, significant material loss, or structural failure. If the damage is extensive and compromises the yoke’s functionality or safety, replacement is necessary.
If you observe any of these signs of wear or damage in a PTO shaft yoke, it is recommended to replace the yoke as soon as possible. Continuing to use a worn or damaged yoke can lead to equipment malfunction, power loss, or even accidents. Regular inspection and maintenance of PTO shaft yokes can help identify these signs early and ensure reliable and safe operation.
Which types of machinery and implements commonly use PTO shaft yokes?
PTO (Power Take-Off) shaft yokes are commonly used in various types of machinery and implements across different industries. They are a crucial component in power transmission systems for a wide range of applications. Here are some examples of machinery and implements that commonly use PTO shaft yokes:
- Agricultural Machinery: PTO shaft yokes are extensively used in agricultural machinery such as tractors, combines, forage harvesters, balers, mowers, tillers, spreaders, and sprayers. These machines rely on the power transfer from the tractor’s PTO to drive their various functions, such as harvesting crops, cutting hay, tilling soil, and spreading fertilizer.
- Construction Equipment: PTO shaft yokes are also found in construction equipment like backhoes, excavators, skid steer loaders, and trenchers. These machines may utilize PTO-driven attachments for tasks such as digging, lifting, and material handling.
- Forestry Equipment: PTO shaft yokes are used in forestry equipment like wood chippers, stump grinders, and log splitters. These machines utilize the power from the PTO to drive their cutting, grinding, and splitting mechanisms.
- Livestock Equipment: Livestock-related machinery such as feed mixers, feed grinders, and silage blowers often employ PTO shaft yokes for power transmission. These machines are used in the preparation and processing of animal feed.
- Industrial Machinery: PTO shaft yokes are utilized in various industrial machinery such as pumps, generators, compressors, industrial mixers, and conveyor systems. These machines often require a reliable power source from the PTO to perform their specific industrial processes.
- Landscaping and Grounds Maintenance Equipment: PTO shaft yokes are commonly found in equipment used for landscaping and grounds maintenance, including rotary mowers, flail mowers, sprayers, and seeders. These machines rely on the PTO power to maintain lawns, clear brush, and apply fertilizers or pesticides.
- Utility Vehicles: Some utility vehicles, such as utility tractors and utility terrain vehicles (UTVs), may have PTO shaft yokes to power attachments or accessories, such as snow blowers, utility brooms, or hydraulic systems.
These are just a few examples, and PTO shaft yokes can be found in many other types of machinery and implements that require the transfer of power from a power source to driven equipment. The versatility and reliability of PTO shaft yokes make them a crucial component in a wide range of industries and applications.
editor by CX 2024-04-29
China factory Tractor Parts Agricultural Pto Shaft Connect Parts Cardan Drive Shaft Yoke U Joint Front Splined Slip Yoke of CZPT Engine
Product Description
Tractor parts Agricultural Pto Shaft Connect Parts Cardan Drive shaft Yoke U Joint Front splined slip yoke Of CHINAMFG Engine
Product Description
Products Description
1.Forged high quality alloy steel cross is case hardened to provide good wear resistance and maximum service life. Pre-installed grease fitting in the cross saves time, prevents installation damage and allows for easy U-Joint maintenance.
2.Forged high strength steel cups are case hardened for strength and durability. Cup face and outer diameter are precision ground to provide precise fit, lock up and balance ability.
3.High carbon steel needle bearings are through hardened and precision ground using a optimized crowning profile for maximum life and load carrying capacity.
4.Seals are made out of high quality nitrile rubber for optimal grease retention and contaminant exclusion. Multi-lip seal is pliable, yet tough and tear resistant.
5.All U-Joints are pre-lubricated with a premium, high temperature grease that performs well in a wide temperature range and provides a long service life.
Company Profile
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Installation Guide |
|---|---|
| Warranty: | 6 Years |
| Condition: | New |
| Color: | Natural Color |
| Certification: | CE |
| Structure: | Single |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
Can you provide real-world examples of farming machinery that rely on PTO shaft yokes?
PTO shaft yokes are essential components in various types of farming machinery, enabling the transfer of power from the power source, such as a tractor or engine, to different implements and attachments. Here are some real-world examples of farming machinery that rely on PTO shaft yokes:
1. Rotary Mowers: Rotary mowers used for cutting grass, weeds, and vegetation often rely on PTO shaft yokes to transfer power from the tractor’s PTO to the mower blades. The PTO shaft yoke connects the rotating shaft of the mower to the PTO shaft of the tractor, allowing the blades to be powered and rotated.
2. Balers: Balers, which are used to compress and bale hay, straw, or other crop residues, utilize PTO shaft yokes to transfer power from the tractor to the baler’s internal mechanisms. These mechanisms include the pickup, feeder, and baling components that require power to collect, process, and form bales.
3. Seeders and Planters: Seeders and planters rely on PTO shaft yokes to transfer power from the tractor’s PTO to the seed metering and distribution systems. The PTO shaft yoke ensures that the seed or plant material is accurately dispensed and planted at the desired spacing and depth.
4. Hay Rakes and Tedders: Hay rakes and tedders, used for gathering and fluffing hay to facilitate drying, utilize PTO shaft yokes to transmit power from the tractor to the rotating tines or paddles. The PTO shaft yoke connects the tractor’s PTO to the gearbox of the rake or tedder, enabling the tines or paddles to rotate and perform their respective tasks.
5. Manure Spreaders: Manure spreaders employ PTO shaft yokes to transfer power from the tractor’s PTO to the spreading mechanisms. These mechanisms include the apron chains, beaters, or paddles that distribute the manure evenly over the field, promoting nutrient recycling and soil fertility.
6. Post Hole Diggers: Post hole diggers, used for creating holes in the ground for fence posts or other structures, rely on PTO shaft yokes to transmit power from the tractor’s PTO to the digging auger. The PTO shaft yoke connects the tractor’s power source to the auger, allowing it to rotate and dig into the ground.
7. Rotary Tillers: Rotary tillers utilize PTO shaft yokes to transfer power from the tractor to the rotating tines or blades. The PTO shaft yoke connects the tractor’s PTO to the gearbox of the tiller, enabling the tines or blades to break up the soil, prepare seedbeds, and incorporate organic matter.
These are just a few examples of farming machinery where PTO shaft yokes play a crucial role in power transmission. PTO shaft yokes are versatile components that enable the connection between the power source and various agricultural implements, enhancing the efficiency and productivity of farming operations.
How do PTO shaft yokes ensure efficient power transfer while maintaining stability?
PTO (Power Take-Off) shaft yokes are designed to ensure efficient power transfer while maintaining stability during operation. They incorporate several features and mechanisms to achieve this. Here’s a detailed explanation:
1. Splined Connection:
PTO shaft yokes typically have a splined connection with the PTO shaft. The splines on the yoke and the shaft interlock, providing a secure and torque-resistant coupling. This design distributes torque evenly along the length of the splined connection, minimizing stress concentrations and ensuring efficient power transfer.
2. Precise Fit and Tolerance:
PTO shaft yokes are designed with precise tolerances to ensure a proper fit with the PTO shaft. The accurate fit helps maximize torque transfer efficiency and minimizes the risk of slippage or power loss. The tight fit also helps maintain stability by reducing vibrations and minimizing backlash or play between the yoke and the shaft.
3. Balancing:
Some PTO shaft yokes are dynamically balanced to minimize vibrations during operation. Balancing helps ensure smooth rotation and reduces stress on the components. By reducing vibrations, balancing contributes to the stability of the power transmission system and improves overall performance.
4. Quality Materials and Construction:
PTO shaft yokes are typically manufactured using durable materials such as steel or forged alloys. These materials offer strength and stability, allowing the yokes to withstand the high torque and rotational forces involved in power transmission. The robust construction ensures that the yokes can maintain their shape and rigidity, minimizing flexing or deformation that could compromise stability.
5. Support Bearings:
In applications involving long PTO shafts or high loads, support bearings may be used to enhance stability. Support bearings are mounted along the length of the PTO shaft and provide additional support, reducing shaft deflection and maintaining alignment. By minimizing shaft deflection, support bearings help ensure efficient power transfer and reduce the risk of misalignment or vibration-related issues.
6. Design Considerations:
PTO shaft yokes are designed with stability in mind. Factors such as the shape, geometry, and reinforcement of the yoke are carefully considered to enhance stability and minimize the risk of unwanted flexing, bending, or distortion during operation.
By incorporating these features and design considerations, PTO shaft yokes ensure efficient power transfer while maintaining stability. They provide a reliable and robust connection between the power source and the driven equipment, contributing to the overall performance and productivity of the machinery or implement.
What benefits do properly functioning PTO shaft yokes offer for equipment operation?
Properly functioning PTO (Power Take-Off) shaft yokes offer several benefits for equipment operation. They play a critical role in ensuring efficient power transmission and overall performance. Here’s a detailed explanation:
1. Reliable Power Transfer: A properly functioning PTO shaft yoke ensures a reliable transfer of power from the power source, such as an engine or power take-off unit, to the driven equipment. The yoke securely connects the PTO shaft to the equipment, allowing for consistent power delivery. This reliability is crucial for equipment that requires a constant power supply to perform tasks effectively and efficiently.
2. Smooth Operation: PTO shaft yokes contribute to smooth equipment operation by minimizing vibration and reducing the risk of misalignment. The precise alignment and connection facilitated by the yoke help maintain the smooth rotation of the equipment’s internal mechanisms. This smooth operation is particularly important for tasks that require precision and accuracy, such as mowing, tilling, or harvesting.
3. Flexibility and Adaptability: Properly functioning PTO shaft yokes often incorporate flexible or articulating features to accommodate movement and misalignment between the power source and the equipment. This flexibility allows the yoke to compensate for slight angular or positional variations, ensuring continuous power transmission even in dynamic operating conditions. It enhances the equipment’s adaptability to different terrains and working environments.
4. Reduced Wear and Tear: PTO shaft yokes that are in good working condition help reduce wear and tear on both the power source and the driven equipment. The proper alignment and connection provided by the yoke minimize stress on the PTO system, reducing the risk of premature component failure. By ensuring smooth power transmission, properly functioning yokes also help mitigate excessive wear on the equipment’s internal components, prolonging their lifespan.
5. Enhanced Safety: Well-maintained PTO shaft yokes contribute to enhanced safety during equipment operation. A secure and properly connected yoke minimizes the risk of unexpected detachment or disengagement, reducing the likelihood of accidents or injuries. Additionally, adherence to safety guidelines, such as proper guarding and shielding of exposed PTO shafts, further enhances the safety of equipment operation.
6. Optimized Performance: Ultimately, properly functioning PTO shaft yokes optimize the overall performance of the equipment. They ensure efficient power transmission, smooth operation, and reduced downtime due to mechanical issues. By enabling reliable power transfer and minimizing wear on components, well-maintained yokes support the equipment’s productivity, longevity, and overall effectiveness in carrying out its intended tasks.
In summary, properly functioning PTO shaft yokes offer benefits such as reliable power transfer, smooth operation, flexibility, reduced wear and tear, enhanced safety, and optimized equipment performance. Regular inspection, maintenance, and adherence to safety guidelines are crucial for ensuring the continued benefits of PTO shaft yokes in equipment operation.
editor by CX 2024-03-18
China manufacturer for Farm Mini Tractors Small Pto Shaft Agricultural Sale 4X4 in Grass Machine Crawler El Salvador Petrol Engine Garden Tractor
Product Description
| Size | 260 cm * 120 cm * 135 cm |
| Drive Wheel | 4WD |
| Power | 12(Kw) |
| Specification | 30-50HP |
| Fuel | Gas / Diesel |
| Weight | 680(kg) |
| Tyres sizes | 500-12/650-16 |
| Usage | Farm Tractor, Garden Tractor, Lawn Tractor |
This is part of the certificate, please contact us if you need more!
We can provide customers with customizable packaging, a large number of goods in stock, and a wide choice of freight routes.
Q1: Can I have a sample order?
A1: Yes, we accept sample order to test and check quality.
Q2: Do you have MOQ limit?
A2: Yes, we have MOQ limit for mass production, but it depends on model. Please contact us for details.
Q3: How about the lead time?
A3: Samples will takes 5-7 business days. Mass production will takes 25-30 days. It depends on quantity.
Q4: How about shipping and delivery time?
A4: Generally, Item will be shipped via Express, such as DHL, TNT, FedEx and UPS, delivery time is 3-7 business days. Airline and sea shipping also available.
In order to better serve customers, we now make the following disclaimer for the product information published on the website that contains text, pictures, and links:
1. The product picture may have a color difference with the actual product due to the different angle and light, as well as the display difference of the monitor. The picture is for reference only, the actual product shall prevail, please contact our staff for more details.
2. It is the customized product, not final retail product. Details, description, pictures, and specifications are subject to the final confirmed order.
3. The price is for reference only, the market price is fluctuating, and the price marked on this page is not the only basis for the final transaction. Please contact our sales staff to confirm the final price.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 6 Months |
|---|---|
| Warranty: | 6 Months |
| Type: | Wheel Tractor |
| Samples: |
US$ 16999/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do manufacturers ensure the compatibility of PTO shafts with different equipment?
Manufacturers employ various measures to ensure the compatibility of PTO (Power Take-Off) shafts with different equipment. Compatibility is crucial to ensure that PTO shafts can effectively transfer power from the power source to the driven machinery without compromising performance, safety, or ease of use. Here’s a detailed explanation of how manufacturers ensure compatibility:
1. Standardization: PTO shafts are designed and manufactured based on standardized specifications. These specifications outline the essential parameters such as shaft dimensions, spline sizes, torque ratings, and safety requirements. By adhering to standardized designs, manufacturers ensure that PTO shafts are compatible with a wide range of equipment that meets the same standards. Standardization allows for interchangeability, meaning that PTO shafts from one manufacturer can be used with equipment from another manufacturer as long as they conform to the same specifications.
2. Collaboration with Equipment Manufacturers: PTO shaft manufacturers often collaborate closely with equipment manufacturers to ensure compatibility. They work together to understand the specific requirements of the equipment and design PTO shafts that seamlessly integrate with the machinery. This collaboration may involve sharing technical specifications, conducting joint testing, and exchanging feedback. By working in partnership, manufacturers can address any compatibility issues early in the design and development process, resulting in PTO shafts that are tailored to the equipment’s needs.
3. Customization Options: PTO shaft manufacturers offer customization options to accommodate different equipment configurations. They provide flexibility in terms of shaft length, spline sizes, yoke designs, and coupling mechanisms. Equipment manufacturers can specify the required parameters, and the PTO shafts can be customized accordingly. This ensures that the PTO shafts precisely match the equipment’s power input/output requirements and connection methods, guaranteeing compatibility and efficient power transfer.
4. Testing and Validation: Manufacturers conduct rigorous testing and validation processes to ensure the compatibility and performance of PTO shafts. They subject the shafts to various tests, including torque testing, rotational speed testing, and durability testing. These tests verify that the PTO shafts can handle the expected power loads and operating conditions without failure. By validating the performance of the PTO shafts, manufacturers can ensure that they are compatible with a wide range of equipment and can reliably transfer power under different operating scenarios.
5. Compliance with Industry Standards: PTO shaft manufacturers adhere to industry standards and regulations to ensure compatibility. Organizations such as the American Society of Agricultural and Biological Engineers (ASABE) establish safety and performance standards for PTO shafts. Manufacturers design and produce their shafts in accordance with these standards, ensuring that their products meet the necessary requirements for compatibility and safety. Compliance with industry standards provides assurance to equipment manufacturers and end-users that the PTO shafts are compatible and suitable for use with different equipment.
6. Documentation and Guidelines: Manufacturers provide comprehensive documentation and guidelines to assist equipment manufacturers and end-users in ensuring compatibility. This documentation includes technical specifications, installation instructions, maintenance guidelines, and safety recommendations. The documentation helps equipment manufacturers select the appropriate PTO shaft for their equipment and provides guidance on proper installation and use. By following the manufacturer’s guidelines, equipment manufacturers can ensure compatibility and optimize the performance of the PTO shafts.
7. Ongoing Research and Development: PTO shaft manufacturers continuously invest in research and development to enhance compatibility with different equipment. They stay updated with industry trends, technological advancements, and evolving equipment requirements. This ongoing research and development enable manufacturers to improve the design, materials, and features of PTO shafts, ensuring compatibility with the latest equipment innovations and addressing any compatibility challenges that may arise.
By employing standardization, collaborating with equipment manufacturers, offering customization options, conducting thorough testing, complying with industry standards, providing documentation and guidelines, and investing in research and development, manufacturers ensure the compatibility of PTO shafts with different equipment. This compatibility allows for seamless integration, efficient power transfer, and optimal performance across a wide range of machinery and equipment in various industries.
Can PTO shafts be customized for specific machinery and power requirements?
Yes, PTO (Power Take-Off) shafts can be customized to meet the specific machinery and power requirements of different applications. Manufacturers offer customization options to ensure that PTO shafts are precisely tailored to the power source, driven machinery, and the intended application. Here’s a detailed explanation of how PTO shafts can be customized:
1. Shaft Length: PTO shafts can be customized in terms of length to accommodate different equipment configurations. The length of the PTO shaft is critical to ensure proper alignment and connection between the power source and driven machinery. Manufacturers can provide PTO shafts with adjustable or fixed-length options, allowing for flexibility in meeting specific length requirements. Customizing the shaft length ensures that the PTO shaft fits the equipment properly, optimizing power transfer efficiency and reducing the risk of misalignment or excessive stress.
2. Spline Sizes: PTO shafts are available with different spline sizes to match the input and output shafts of various equipment. Spline size customization allows the PTO shaft to seamlessly connect to the power source and driven machinery. Manufacturers can offer different spline configurations, such as 1-3/8 inch, 1-3/4 inch, or metric sizes, to accommodate specific machinery requirements. Customizing the spline size ensures a proper fit and secure connection, enabling efficient power transfer without the need for additional adapters or modifications.
3. Yoke Designs: PTO shafts can be customized with different yoke designs to match the connection points on the power source and driven machinery. The yoke is the component that attaches to the shaft and connects to the equipment. Manufacturers can provide various yoke designs, such as round, triangular, or splined yokes, to ensure compatibility with specific machinery. Customizing the yoke design allows for a secure and reliable connection, aligning the PTO shaft with the equipment’s input/output shafts and optimizing power transmission efficiency.
4. Torque Ratings: PTO shafts can be customized to handle specific torque requirements based on the power demands of the application. Torque is the rotational force that the PTO shaft needs to transmit from the power source to the driven machinery. Manufacturers can design PTO shafts with different torque ratings by using appropriate materials, dimensions, and reinforcement techniques. Customizing the torque rating ensures that the PTO shaft can safely and reliably handle the required power levels without premature wear or failure.
5. Coupling Mechanisms: PTO shafts can be customized with different coupling mechanisms to match the connection requirements of specific equipment. Coupling mechanisms are the means by which the PTO shaft connects and disconnects from the power source and driven machinery. Manufacturers can provide various coupling options, such as quick-release couplings, shear pin couplings, or mechanical lock couplings, to accommodate different machinery designs and operational needs. Customizing the coupling mechanism ensures ease of use, secure attachment, and quick disengagement when necessary.
6. Protective Features: PTO shafts can be customized with additional protective features to enhance safety and durability. These features may include guard shields, safety covers, or slip clutches. Guard shields and safety covers provide physical protection by enclosing the rotating shaft and preventing accidental contact, reducing the risk of injuries. Slip clutches offer overload protection by allowing the PTO shaft to slip or disengage when excessive torque or resistance is encountered, preventing damage to the shaft and associated equipment. Customizing the protective features ensures compliance with safety regulations and addresses specific safety requirements of the machinery or application.
7. Material Selection: PTO shafts can be customized with different materials based on the application’s demands. Manufacturers can offer a range of material options, such as steel, aluminum, or composite materials, with varying strength, weight, and corrosion resistance properties. Customizing the material selection allows for optimizing the PTO shaft’s performance, considering factors like operating conditions, environmental exposure, and weight restrictions.
By providing customization options such as shaft length, spline sizes, yoke designs, torque ratings, coupling mechanisms, protective features, and material selection, manufacturers can ensure that PTO shafts are specifically tailored to meet the machinery and power requirements of different applications. Customized PTO shafts facilitate seamless integration, efficient power transfer, and reliable operation, enhancing the overall performance and productivity of the equipment.
Can you explain the different types of PTO shafts and their applications?
PTO shafts (Power Take-Off shafts) come in various types, each designed for specific applications and requirements. The different types of PTO shafts offer versatility and compatibility with a wide range of machinery and implements. Here’s an explanation of the most common types of PTO shafts and their applications:
1. Standard PTO Shaft: The standard PTO shaft, also known as a splined shaft, is the most common type used in agricultural and industrial machinery. It consists of a solid steel shaft with splines or grooves along its length. The standard PTO shaft typically has six splines, although variations with four or eight splines can be found. This type of PTO shaft is widely used in tractors and various implements, including mowers, balers, tillers, and rotary cutters. The splines provide a secure connection between the power source and the driven machinery, ensuring efficient power transfer.
2. Shear Bolt PTO Shaft: Shear bolt PTO shafts are designed with a safety feature that allows the shaft to separate in case of overload or sudden shock to protect the driveline components. These PTO shafts incorporate a shear bolt mechanism that connects the tractor’s power take-off to the driven machinery. In the event of excessive load or sudden resistance, the shear bolt is designed to break, disconnecting the PTO shaft and preventing damage to the driveline. Shear bolt PTO shafts are commonly used in equipment that may encounter sudden obstructions or high-stress situations, such as wood chippers, stump grinders, and heavy-duty rotary cutters.
3. Friction Clutch PTO Shaft: Friction clutch PTO shafts feature a clutch mechanism that allows for smooth engagement and disengagement of the power transfer. These PTO shafts typically incorporate a friction disc and a pressure plate, similar to a traditional vehicle clutch system. The friction clutch allows operators to gradually engage or disengage the power transfer, reducing shock loads and minimizing wear on the driveline components. Friction clutch PTO shafts are commonly used in applications where precise control of power engagement is required, such as in hydraulic pumps, generators, and industrial mixers.
4. Constant Velocity (CV) PTO Shaft: Constant Velocity (CV) PTO shafts, also known as homokinetic shafts, are designed to accommodate high angles of misalignment without affecting power transmission. They use a universal joint mechanism that allows for smooth power transfer even when the driven machinery is at an angle relative to the power source. CV PTO shafts are frequently used in applications where the machinery requires a significant range of movement or articulation, such as in articulated loaders, telescopic handlers, and self-propelled sprayers.
5. Telescopic PTO Shaft: Telescopic PTO shafts are adjustable in length, allowing for flexibility in equipment configuration and varying distances between the power source and the driven machinery. They consist of two or more concentric shafts that slide within each other, providing the ability to extend or retract the PTO shaft as needed. Telescopic PTO shafts are commonly used in applications where the distance between the tractor’s power take-off and the implement varies, such as in front-mounted implements, snow blowers, and self-loading wagons. The telescopic design enables easy adaptation to different equipment setups and minimizes the risk of the PTO shaft dragging on the ground.
6. Gearbox PTO Shaft: Gearbox PTO shafts are designed to adapt power transmission between different rotational speeds or directions. They incorporate a gearbox mechanism that allows for speed reduction or increase, as well as the ability to change rotational direction. Gearbox PTO shafts are commonly used in applications where the driven machinery requires a different speed or rotational direction than the tractor’s power take-off. Examples include grain augers, feed mixers, and industrial equipment that requires specific speed ratios or reversing capabilities.
It’s important to note that the availability and specific applications of PTO shaft types may vary based on regional and industry-specific factors. Additionally, certain machinery or implements may require specialized or custom PTO shafts to meet specific requirements.
In summary, the different types of PTO shafts, such as standard, shear bolt, friction clutch, constant velocity (CV), telescopic, and gearbox shafts, offer versatility and compatibility with various machinery and implements. Each type of PTO shaft is designed to address specific needs, such as power transfer efficiency, safety, smooth engagement, misalignment tolerance, adaptability, and speed/direction adjustment. Understanding the different types of PTO shafts and their applications is crucial for selecting the appropriate shaft forthe intended machinery and ensuring optimal performance and reliability.
editor by CX 2024-02-26
China factory Tractor Parts Agricultural Pto Shaft Connect Parts Cardan Drive Shaft Yoke U Joint Front Splined Slip Yoke of CZPT Engine
Product Description
Tractor parts Agricultural Pto Shaft Connect Parts Cardan Drive shaft Yoke U Joint Front splined slip yoke Of CHINAMFG Engine
Products Description
1.Forged high quality alloy steel cross is case hardened to provide good wear resistance and maximum service life. Pre-installed grease fitting in the cross saves time, prevents installation damage and allows for easy U-Joint maintenance.
2.Forged high strength steel cups are case hardened for strength and durability. Cup face and outer diameter are precision ground to provide precise fit, lock up and balance ability.
3.High carbon steel needle bearings are through hardened and precision ground using a optimized crowning profile for maximum life and load carrying capacity.
4.Seals are made out of high quality nitrile rubber for optimal grease retention and contaminant exclusion. Multi-lip seal is pliable, yet tough and tear resistant.
5.All U-Joints are pre-lubricated with a premium, high temperature grease that performs well in a wide temperature range and provides a long service life.
Company Profile
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Installation Guide |
|---|---|
| Warranty: | 6 Years |
| Condition: | New |
| Color: | Natural Color |
| Certification: | CE |
| Structure: | Single |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
Can you provide real-world examples of farming machinery that rely on PTO shaft yokes?
PTO shaft yokes are essential components in various types of farming machinery, enabling the transfer of power from the power source, such as a tractor or engine, to different implements and attachments. Here are some real-world examples of farming machinery that rely on PTO shaft yokes:
1. Rotary Mowers: Rotary mowers used for cutting grass, weeds, and vegetation often rely on PTO shaft yokes to transfer power from the tractor’s PTO to the mower blades. The PTO shaft yoke connects the rotating shaft of the mower to the PTO shaft of the tractor, allowing the blades to be powered and rotated.
2. Balers: Balers, which are used to compress and bale hay, straw, or other crop residues, utilize PTO shaft yokes to transfer power from the tractor to the baler’s internal mechanisms. These mechanisms include the pickup, feeder, and baling components that require power to collect, process, and form bales.
3. Seeders and Planters: Seeders and planters rely on PTO shaft yokes to transfer power from the tractor’s PTO to the seed metering and distribution systems. The PTO shaft yoke ensures that the seed or plant material is accurately dispensed and planted at the desired spacing and depth.
4. Hay Rakes and Tedders: Hay rakes and tedders, used for gathering and fluffing hay to facilitate drying, utilize PTO shaft yokes to transmit power from the tractor to the rotating tines or paddles. The PTO shaft yoke connects the tractor’s PTO to the gearbox of the rake or tedder, enabling the tines or paddles to rotate and perform their respective tasks.
5. Manure Spreaders: Manure spreaders employ PTO shaft yokes to transfer power from the tractor’s PTO to the spreading mechanisms. These mechanisms include the apron chains, beaters, or paddles that distribute the manure evenly over the field, promoting nutrient recycling and soil fertility.
6. Post Hole Diggers: Post hole diggers, used for creating holes in the ground for fence posts or other structures, rely on PTO shaft yokes to transmit power from the tractor’s PTO to the digging auger. The PTO shaft yoke connects the tractor’s power source to the auger, allowing it to rotate and dig into the ground.
7. Rotary Tillers: Rotary tillers utilize PTO shaft yokes to transfer power from the tractor to the rotating tines or blades. The PTO shaft yoke connects the tractor’s PTO to the gearbox of the tiller, enabling the tines or blades to break up the soil, prepare seedbeds, and incorporate organic matter.
These are just a few examples of farming machinery where PTO shaft yokes play a crucial role in power transmission. PTO shaft yokes are versatile components that enable the connection between the power source and various agricultural implements, enhancing the efficiency and productivity of farming operations.
How do manufacturers ensure the compatibility and quality of PTO shaft yokes?
Manufacturers employ various measures to ensure the compatibility and quality of PTO shaft yokes. These measures include:
1. Design and Engineering: Manufacturers invest significant effort in the design and engineering of PTO shaft yokes. They consider factors such as shaft size, spline count, connection methods, and load requirements to develop yokes that are compatible with a wide range of applications. Computer-aided design (CAD) software and engineering analysis tools are often utilized to ensure precise dimensions, optimal strength, and proper fit.
2. Material Selection: High-quality materials, typically steel or other alloys, are carefully chosen for manufacturing PTO shaft yokes. These materials possess the necessary strength, durability, and resistance to wear and tear. Manufacturers may conduct material testing and quality control procedures to ensure the selected materials meet or exceed industry standards.
3. Manufacturing Standards: Manufacturers adhere to strict manufacturing standards and processes to ensure consistency and quality. They may follow industry standards such as ISO (International Organization for Standardization) or other regional standards specific to agricultural or industrial equipment. These standards cover aspects such as dimensional tolerances, surface finish, heat treatment, and overall product performance.
4. Quality Control: Manufacturers implement rigorous quality control procedures at various stages of production. These procedures may include dimensional inspections, spline fitment checks, surface finish evaluations, and load testing. Quality control personnel perform visual inspections and employ specialized tools and equipment to verify the compliance of each PTO shaft yoke with the specified requirements.
5. Testing and Certification: To ensure compatibility and performance, PTO shaft yokes may undergo testing under simulated operating conditions. This may involve testing for torque transmission, rotational speed, misalignment tolerance, and load capacity. Additionally, manufacturers may seek certifications from independent testing agencies or organizations to validate the quality, reliability, and safety of their yokes.
6. Documentation and Guidelines: Manufacturers provide detailed product documentation, including specifications, installation guidelines, and maintenance instructions. This information helps users select the appropriate yokes for their applications and ensure proper installation and operation.
By implementing these measures, manufacturers strive to ensure that PTO shaft yokes are compatible, reliable, and capable of withstanding the demands of agricultural and industrial settings. However, it is important for users to follow the manufacturer’s guidelines, adhere to safety protocols, and regularly inspect and maintain the PTO shaft yokes to ensure continued compatibility and performance.
Which types of machinery and implements commonly use PTO shaft yokes?
PTO (Power Take-Off) shaft yokes are commonly used in various types of machinery and implements across different industries. They are a crucial component in power transmission systems for a wide range of applications. Here are some examples of machinery and implements that commonly use PTO shaft yokes:
- Agricultural Machinery: PTO shaft yokes are extensively used in agricultural machinery such as tractors, combines, forage harvesters, balers, mowers, tillers, spreaders, and sprayers. These machines rely on the power transfer from the tractor’s PTO to drive their various functions, such as harvesting crops, cutting hay, tilling soil, and spreading fertilizer.
- Construction Equipment: PTO shaft yokes are also found in construction equipment like backhoes, excavators, skid steer loaders, and trenchers. These machines may utilize PTO-driven attachments for tasks such as digging, lifting, and material handling.
- Forestry Equipment: PTO shaft yokes are used in forestry equipment like wood chippers, stump grinders, and log splitters. These machines utilize the power from the PTO to drive their cutting, grinding, and splitting mechanisms.
- Livestock Equipment: Livestock-related machinery such as feed mixers, feed grinders, and silage blowers often employ PTO shaft yokes for power transmission. These machines are used in the preparation and processing of animal feed.
- Industrial Machinery: PTO shaft yokes are utilized in various industrial machinery such as pumps, generators, compressors, industrial mixers, and conveyor systems. These machines often require a reliable power source from the PTO to perform their specific industrial processes.
- Landscaping and Grounds Maintenance Equipment: PTO shaft yokes are commonly found in equipment used for landscaping and grounds maintenance, including rotary mowers, flail mowers, sprayers, and seeders. These machines rely on the PTO power to maintain lawns, clear brush, and apply fertilizers or pesticides.
- Utility Vehicles: Some utility vehicles, such as utility tractors and utility terrain vehicles (UTVs), may have PTO shaft yokes to power attachments or accessories, such as snow blowers, utility brooms, or hydraulic systems.
These are just a few examples, and PTO shaft yokes can be found in many other types of machinery and implements that require the transfer of power from a power source to driven equipment. The versatility and reliability of PTO shaft yokes make them a crucial component in a wide range of industries and applications.
editor by CX 2024-01-09
China Good quality Tractor Parts Agricultural Pto Shaft Connect Parts Cardan Drive Shaft Yoke U Joint Front Splined Slip Yoke of CZPT Engine
Product Description
Tractor parts Agricultural Pto Shaft Connect Parts Cardan Drive shaft Yoke U Joint Front splined slip yoke Of CHINAMFG Engine
Products Description
1.Forged high quality alloy steel cross is case hardened to provide good wear resistance and maximum service life. Pre-installed grease fitting in the cross saves time, prevents installation damage and allows for easy U-Joint maintenance.
2.Forged high strength steel cups are case hardened for strength and durability. Cup face and outer diameter are precision ground to provide precise fit, lock up and balance ability.
3.High carbon steel needle bearings are through hardened and precision ground using a optimized crowning profile for maximum life and load carrying capacity.
4.Seals are made out of high quality nitrile rubber for optimal grease retention and contaminant exclusion. Multi-lip seal is pliable, yet tough and tear resistant.
5.All U-Joints are pre-lubricated with a premium, high temperature grease that performs well in a wide temperature range and provides a long service life.
Company Profile
| After-sales Service: | Installation Guide |
|---|---|
| Warranty: | 6 Years |
| Condition: | New |
| Color: | Natural Color |
| Certification: | CE |
| Structure: | Single |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
How do PTO shaft yokes handle variations in load and torque during operation?
PTO shaft yokes are designed to handle variations in load and torque during operation, providing a reliable and efficient power transmission between the power source and the implement. Here’s how they handle these variations:
1. Flexible Coupling: PTO shaft yokes serve as a flexible coupling between the power source and the implement. This flexibility allows them to accommodate variations in load and torque. As the implement encounters changes in resistance or load, the PTO shaft yoke flexes slightly, absorbing the shocks or fluctuations. This flexibility helps prevent excessive stress on the driveline components and ensures smoother operation.
2. Slip Clutches: Some PTO shaft yokes incorporate slip clutches as a safety feature to handle sudden increases in torque or overload conditions. Slip clutches allow controlled slippage between the yoke and the PTO shaft, protecting the driveline from damage. When the torque exceeds a certain threshold, the slip clutch disengages, allowing the yoke to slip momentarily, absorbing the excess torque. Once the torque decreases to a safe level, the slip clutch re-engages, restoring power transmission.
3. Torque Limiters: Torque limiters are another mechanism used in certain PTO shaft yokes to handle variations in torque. These devices are designed to limit the amount of torque that can be transmitted through the yoke. In high-torque situations, such as encountering a sudden resistance, the torque limiter disengages, preventing excessive torque from reaching the driveline and protecting the equipment from damage.
4. Shear Pins: Some PTO shaft yokes utilize shear pins as a sacrificial weak point in the power transmission system. Shear pins are designed to break under excessive load or torque, disconnecting the yoke from the PTO shaft. This helps protect the driveline and other components from damage. Shear pins can be easily replaced, restoring the yoke’s functionality.
5. Adjustments and Calibration: In certain cases, operators can make adjustments or calibrations to PTO shaft yokes to optimize their performance based on the specific load and torque requirements. This may involve adjusting the clutch engagement settings, changing gear ratios, or modifying the power source’s speed to achieve the desired power output.
By incorporating flexible coupling, slip clutches, torque limiters, shear pins, and offering adjustment options, PTO shaft yokes effectively handle variations in load and torque during operation. These features help protect the driveline, prevent equipment damage, and ensure efficient power transmission in a wide range of applications.
How do PTO shaft yokes ensure efficient power transfer while maintaining stability?
PTO (Power Take-Off) shaft yokes are designed to ensure efficient power transfer while maintaining stability during operation. They incorporate several features and mechanisms to achieve this. Here’s a detailed explanation:
1. Splined Connection:
PTO shaft yokes typically have a splined connection with the PTO shaft. The splines on the yoke and the shaft interlock, providing a secure and torque-resistant coupling. This design distributes torque evenly along the length of the splined connection, minimizing stress concentrations and ensuring efficient power transfer.
2. Precise Fit and Tolerance:
PTO shaft yokes are designed with precise tolerances to ensure a proper fit with the PTO shaft. The accurate fit helps maximize torque transfer efficiency and minimizes the risk of slippage or power loss. The tight fit also helps maintain stability by reducing vibrations and minimizing backlash or play between the yoke and the shaft.
3. Balancing:
Some PTO shaft yokes are dynamically balanced to minimize vibrations during operation. Balancing helps ensure smooth rotation and reduces stress on the components. By reducing vibrations, balancing contributes to the stability of the power transmission system and improves overall performance.
4. Quality Materials and Construction:
PTO shaft yokes are typically manufactured using durable materials such as steel or forged alloys. These materials offer strength and stability, allowing the yokes to withstand the high torque and rotational forces involved in power transmission. The robust construction ensures that the yokes can maintain their shape and rigidity, minimizing flexing or deformation that could compromise stability.
5. Support Bearings:
In applications involving long PTO shafts or high loads, support bearings may be used to enhance stability. Support bearings are mounted along the length of the PTO shaft and provide additional support, reducing shaft deflection and maintaining alignment. By minimizing shaft deflection, support bearings help ensure efficient power transfer and reduce the risk of misalignment or vibration-related issues.
6. Design Considerations:
PTO shaft yokes are designed with stability in mind. Factors such as the shape, geometry, and reinforcement of the yoke are carefully considered to enhance stability and minimize the risk of unwanted flexing, bending, or distortion during operation.
By incorporating these features and design considerations, PTO shaft yokes ensure efficient power transfer while maintaining stability. They provide a reliable and robust connection between the power source and the driven equipment, contributing to the overall performance and productivity of the machinery or implement.
Which types of machinery and implements commonly use PTO shaft yokes?
PTO (Power Take-Off) shaft yokes are commonly used in various types of machinery and implements across different industries. They are a crucial component in power transmission systems for a wide range of applications. Here are some examples of machinery and implements that commonly use PTO shaft yokes:
- Agricultural Machinery: PTO shaft yokes are extensively used in agricultural machinery such as tractors, combines, forage harvesters, balers, mowers, tillers, spreaders, and sprayers. These machines rely on the power transfer from the tractor’s PTO to drive their various functions, such as harvesting crops, cutting hay, tilling soil, and spreading fertilizer.
- Construction Equipment: PTO shaft yokes are also found in construction equipment like backhoes, excavators, skid steer loaders, and trenchers. These machines may utilize PTO-driven attachments for tasks such as digging, lifting, and material handling.
- Forestry Equipment: PTO shaft yokes are used in forestry equipment like wood chippers, stump grinders, and log splitters. These machines utilize the power from the PTO to drive their cutting, grinding, and splitting mechanisms.
- Livestock Equipment: Livestock-related machinery such as feed mixers, feed grinders, and silage blowers often employ PTO shaft yokes for power transmission. These machines are used in the preparation and processing of animal feed.
- Industrial Machinery: PTO shaft yokes are utilized in various industrial machinery such as pumps, generators, compressors, industrial mixers, and conveyor systems. These machines often require a reliable power source from the PTO to perform their specific industrial processes.
- Landscaping and Grounds Maintenance Equipment: PTO shaft yokes are commonly found in equipment used for landscaping and grounds maintenance, including rotary mowers, flail mowers, sprayers, and seeders. These machines rely on the PTO power to maintain lawns, clear brush, and apply fertilizers or pesticides.
- Utility Vehicles: Some utility vehicles, such as utility tractors and utility terrain vehicles (UTVs), may have PTO shaft yokes to power attachments or accessories, such as snow blowers, utility brooms, or hydraulic systems.
These are just a few examples, and PTO shaft yokes can be found in many other types of machinery and implements that require the transfer of power from a power source to driven equipment. The versatility and reliability of PTO shaft yokes make them a crucial component in a wide range of industries and applications.
editor by CX 2023-12-11
Best wholesaler made in China – replacement parts – PTO shaft manufacturer & factory Lonfa tj front driveshaft 170f Air-Cooled Diesel Engine with Ce with ce certificate top quality low price
We – EPG Group the largest agricultural gearbox and pto manufacturing facility in China with 5 various branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
subaru travel shaft Our muncie pto bolts products ford 9n pto shaft is tractor pto shaft parts popular pto shaft handles exported 2005 jeep grand cherokee travel shaft to pto shaft for bush hog 2715 legend the 05 jeep grand cherokee entrance travel shaft United 2007 nissan titan push shaft States, nissan x path entrance drive shaft Germany, Australia, Russia, Spain, Hungary, Zimbabwe, Ukraine, Nigeria, Peru, Brazil, Center and South The usa, Thailand, Pakistan, Indonesia, much more than 60 international locations and locations. EPG is prepared to cooperate sincerely and develop frequently with pals!
Merchandise Identify
EPT 170F Air-cooled EPT Engine With CE
With Strict Screening from Spare Elements to whole Machine,
Large gasoline tank potential, four hours of continuous operation
Large high quality electricity output
Competent mechanical seal gadget
Compact in structure and practical for have
Straightforward starting by recoil or E-begin(important begin with battery)
EPT balancer shaft within lowers the vibration to the minimum degree
one. Solitary cylinder. 4-stroke air -cooled EPT motor
two. Combustion system: Direct injection
3. Electrical power just take off: Crankshaft or camshaft(camshaft PTO rpmis)
four. Starting up system: Recoil or electric powered is optional
five. Choice: Oil tub air cleaner is optional
Solution Particulars
| Title | Merchandise | LFD170F | LFD178F/FA | LFD186F/FA | |||
| EPT Engine | EngineType | Single cylinda4-strokeair-cooled EPT engine | |||||
| Combustion system | Direct Injection | Direct Injection | Direct Injection | ||||
| Bore x Stroke(mm) | 70×55 | 78×62/78×64 | 86×70/86×72 | ||||
| Displacement(CC) | 211 | 296/305 | 406/418 | ||||
| Engine Pace(rpm) | 3000 | 3600 | 3000 | 3600 | 3000 | 3600 | |
| Optimum Output(hp) | 3.8 | four.two | 5.7 | seven | 9 | 10 | |
| Ongoing Output(hp) | three.four | 3.eight | 5.2 | six | 8.2 | nine | |
| Power just take off | Crankshaft or camshaft(camshaft PTO rpm is1/2) | ||||||
| Begin Technique | Recoil or electric powered(optional) | ||||||
| Fuel tank capability(L) | 2.5 | 3.5 | 5.5 | ||||
| Lube oil capacity(L) | 0.seventy five | 1.1 | 1.sixty five | ||||
| Dimensions( Lx Wx H)(mm) | 420X360X460 | 440X370X480 | 480X420X530 | ||||
| Internet Excess weight (recoil)(kg) | 27 | 33 | 48 | ||||
| Internet Excess weight (electric powered)(kg) | 32 | 38 | 53 | ||||
| Gas type | 0#,-ten#,-20# | ||||||
| Lube oil kind | CD Quality or SAE 10W-thirty,SAE 15W-40 | ||||||
| Option | Oil tub air cleaner | ||||||
About us
HangZhou LONGFA MACHINERY CO., LTD
Positioned: HangZhou City, ZHangZhoug Province, China
Main Business: Generator, Water Pump & Engine
Historical past: 14 years experience for manufacturing
Marketing network: Europe, Middle East, Africa, South East Asia, etc
Certification: CCC, CE, ISO9001, SONCAP, EPA, SGS, BV
Guaranty: 12 months warranty for all products
Technological innovation: Professional technical engineers and R&D team
Management: Scientific management and strict quality control system
Equipments: Advanced automatic production line and test equipment
Innovation: Continuously diversify products range to satisfy customers
Production capacity: 50000PCS/month
Marketing mode: 100% export business
1.Q:What goods are you factory production?
A:We manufacture Turbines, Drinking water Pumps & Engines.
2.Q:Exactly where is your factory situated? How can I pay a visit to there?
A: Our manufacturing facility is situated in HangZhou Metropolis, ZHangZhoug Province, China, about 2 hours train from ZheJiang . All our consumers, from residence or abroad, are warmly welcome to check out us!
three.Q:What is the substance of your items?
A: Only New content can be utilised for our products.
Materia EPT for Generator: one hundred% Pure Crankcase, 100% Pure Copper Wire
Materia EPT for Drinking water Pump: one hundred% Pure Auminium Pump physique and Crankcase
4.Q:What is Minimum Get quantity?
A: MOQ 50/100 pieces for distinct merchandise.
You are welcomed to seek advice from for particulars.
five.Q:What is the High quality Guarantee for the goods?
A: Our merchandise are based on twelve-18 months top quality guarantee according to distinct grade spare areas considering that consumer obtained the merchandise.
six.Q: What are the top quality guarantee contents?
A: The goods will be strictly analyzed just before export
Non-human damage ,free placecement areas
We offer on-line specialized information conversation by way of email ,phone ,vedio or chatting as well EPT 24 hrs a day
Engineer is availabe to be overseas for following-sale services
From the inner elements to the outside the house packing, we not only make stHangZhourd quality examination,but also consider ahead for a greater remedy. Other than organization QC system, We have accomplished CE & SONCAP certification.
Best Cost made in China – replacement parts – PTO shaft manufacturer & factory Cag hydraulic pump to pto adapter 5.5HP 4-Stroke Single Cylinder Ohv Gasoline Petrol Engine Working with ce certificate top quality low price
We – EPG Team the biggest agricultural gearbox and pto manufacturing facility in China with 5 different branches. For much more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
1997 honda crv generate shaft Our use of pto shaft in tractor factory pto shaft fast release pin has vivaro drive shaft attained pto shaft for 5′ bush hog the pto shaft slip clutch adjustment certification pto shaft cv joint of tractor pto shaft yoke China’s employed driveshafts in close proximity to me Farm tractor pto shaft repair Equipment Products High quality Authentication promulgated by the Farm Equipment Items High quality Authentication Centre of China. Beneath the direction of managerial sense of “Serving agriculture, scoring a accomplishment via quality of products and honesty in business”, our goods have been trusted by clients and have acquired a more substantial share of market place.
| Data for CAG Gasoline Motor | |||
| Model & HP | TG160(5.5HP) | TG200(6.5HP) | TG210(7HP) |
| Engine kind | OHV Air Cooled Single Cylinder | ||
| Bore× Stroke | 68x45mm | 68x54mm | 70x56mm |
| Displacement | 163cc | 196cc | 212cc |
| Compression ratio | eight.5: one | 8.5: 1 | eight.5: 1 |
| Starting technique | Recoil | Recoil | Recoil |
| Speed | 3000 / 3600rpm | 3000 / 3600rpm | 3000 / 3600rpm |
| Max output(kW/3600rpm) | five.5HP | 6.5HP | seven.0HP |
| Rated output(kW/3600rpm) | two.94 | three.68 | 3.82 |
| Torque | 10.8N. m/2500rpm | 13N. m/2500rpm | 14N. m/2500rpm |
| Fuel intake | 395g/kW. h | 395g/kW. h | |
| Fuel tank capacity | 3.6L | three.6L | three.6L |
| Oil ability | .6L | .6L | .6L |
| N. W. /G. W. | fifteen/16.5kg | sixteen/seventeen.5kg | sixteen/17.5kg |
| Dimension | 387x330x365mm | 387x330x365mm | 387x330x365mm |
| PTO shaft rotation | Counterclockwise(from PTO shaft facet) | ||
| Optional | Electric start off, PTO shaft, air cleaner | ||
• An productive air cleaner method
• Compact in construction and little in size
• Multi-selection PTO shafts(keyway shaft, thread shaft and taper shaft)
• Recoil or electric powered commence, with oil bath air filter
• Overhead valve (OHV) layout, reduced operation temperature, powerful travel and reliability and longevity, and it saves more oil.
• C EPT iron casing does not only properly boost lubrication but also can make the motor more wear-resist EPT and prolongs motor daily life.
• Automatic alarm and end at a lower oil level, which stops the engine to operate at low oil stage and gives far more security to the motor.
• Metal cam and cast crankshaft make the motor far more reputable and durable.
Air-Cooled Cheap made in China – replacement parts – series 4 pto shaft 4-Stroke 25HP V-Twin Cylinder Diesel Engine with ce certificate top quality low price
We – EPG Group the greatest agricultural gearbox and pto manufacturing unit in China with 5 different branches. For more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
variety rover generate shaft EPG e46 drive shaft u joint substitute Equipment john deere pto shaft include is eurocardan pto shaft protect positioned 10 spline pto shaft in tractor source put up hole digger guide XiHu 2007 jeep commander entrance travel shaft Region tractor pto shaft producers in india HangZhou pto shaft square tubing Zhejiang 97 jeep grand cherokee front push shaft ,China. It is 30km from our manufacturing facility to HangZhou worldwide airport. It is our purpose to supply a extensive range of top quality goods at cost-effective rates, supply the best support for consumers happy and add to our continued improvement. Advantage Functions:
1) Low gasoline intake, low emission, compact construction and light bodyweight.
2) SAE connection dimension.
3) Bosch injector, SKF principal bearing.
4) Different dimension of PTO shafts for many kinds of applications.
five) V twin cylinder with 90°, small vibration and large preformance.
Technical specs
| Motor Product | DE2V1000 |
| Motor Variety | Air-cooled, V-twin cylinder, 4-stroke |
| Combustion System | Direct Injection |
| Bore x Stroke | 92x75mm |
| Overall Displacement | 997cc |
| Compression Ratio | 20:01 |
| Rated Electricity | 15KW/3000RPM sixteen.5KW/3600RPM |
| Rated Velocity | 3000/3600RPM |
| Commencing Technique | Electric Begin |
| Gas Tank Capaity (For option) | 12L |
| Lube | 4.0L |
| Fuel Consumpition | ≤240g/kw.h (3000RPM) |
| ≤255g/kw.h (3600RPM) | |
| Fuel Kind | #(Summer season),-ten#(Wintertime) Gentle Diesel |
| Lube Oil Quality | SAE10W40 (CD grade previously mentioned) |
| Net Dimension (LxWxH) | 580x465x585mm |
| Internet Fat | 75kg |
HOWO shop China in Uvira Democratic Republic of the Congo Truck Engine Spare Parts Shaft Coupling Vg1560080300 Sinotruk with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Quick Details
| After-sales Service Provided: | rovided: Video technical support, Online support, Free spare parts |
| Warranty: | 180 Days |
| Place of Origin: | ZheJiang China |
| Delivery: | 1-3 Working Days |
| Size: | standard |
| Port: | HangZhou ZheJiang HangZhou |
| Condition: | 100%new |
| Material: | steel |
| Model Number: | VG1560080300 |
| Certification: | ISO9001 |
| Packing: | Wooden Case |
| Brand Name: | original/oem |
| Payment: | TT.Money Gram.Western Union. Paypal |
| Type: | Air compressor |
| Part name: | EPT EPT Engine Spare Parts Shaft Coupling |
| Packaging Detail: | Professional packing by carton boxes,fumigation-free plywood cases or pallets. |
| Selling Units: | Single item |
| Single package size: | 30X30X30 cm |
| Single gross weight: | 10.0 KG |
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
